Would you have taken this home?

Vhoov

Hero Member
Joined
May 9, 2016
Messages
839
Reaction score
2,800
Golden Thread
0
Location
Georgia
Detector(s) used
Equinox 800, AT Pro, Pro pointer AT,
Primary Interest:
All Treasure Hunting
I went back to the swimming hole sifting sand through classifiers like I did last summer...it was all posted here at the time in multiple posts. It produced 7 silvers, about 50 dollars in clad, silver jewelry, and two gold rings. No detector.

Some history behind this place.... it was a rock quarry at one point and also a grist mill in the 1800s. At the library the only stuff I could find was references to the quarry and that the granite grinding wheel was found when it was being turned into a park. This was in a newspaper clipping from 1954 I think. They turned the wheel into a picnic table.

Well, I had to get through a years worth of gravel and trash since last summer to get down to the old layer....the 1800s layer. This is where I left off last year and unfortunately dont think I'll be able to go much further.

I found the old gear that was not found when the stone wheel was found. Its 20 inches wide and 5 inches thick. Solid cast iron. Should I have left it? I'm not going to do a thing with it....but it's a piece of history being over 120 years old.
Didn't want to just leave it there homeless....so I rolled it very slowly to my truck. Two person lift required.

20180729_110510.webp

Anyway, on the way to that layer I found a sterling ring that was deposited since last summer. It used to be gold plated.

20180729_113113.webp

Everything else I found .....
Old square nails/grist mill hardware top right. Clad bottom right. Sharp glass and other crap also removed from the water supply.

20180729_161700.webp

20180729_161902.webp
 

Last edited:
Upvote 14
I would have taken that home in a heartbeat. It would make an excellent yard ornament.
 

Hahahaha... I that's a good one...well done lol....you have me in tears

I photoshopped your gear onto that frame.. which really holds a grinding wheel .. because it looks like an easy frame to build and would show off the entire gear .. I think it would make a neat display!
 

Probably would have been lighter if you were able to get the stones out. It would make a good base for a flag staff.
Cool find
 

Last edited:

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top