Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I ordered a set of cheap carbon fiber cell phone feraday bags, but the cloth is expensive. Not sure what would be better graphite or carbon fiber socks and bed sheets. I need to Dowse the carbon fiber cloth I have coming, before I decide if it works .Okay, that led me to carbon fiber, much cheaper. They have feraday bags, Matt's and rugs. I need to order some carbon fiber, and hope it works as well as expensive graphite..
I dowsed and the 32 khz frequency, is the same strength as a 1.9341 khz, master key, I used to use years back. And it's the same strength as the Schumann resonance master key frequencies in Hz. 7.83, 11.2, 22.4 i think they are... Somehow I got lucky and dialed to a number almost twice as strong as those others.. If I had someone dialing the frequencies as fast as I can dowse, every second. There has to be an even stronger one, than what I now use., we could find..I dowsed it 32 khz is a pretty strong master key frequency their using.. A mimic everything frequency, a bad drain. Works well for treasure hunting also..
I ordered a set of cheap carbon fiber cell phone feraday bags, but the cloth is expensive.
Yes, I'd love to forget about Styrofoam. Stick to graphite, or carbon fiber.Your "Faraday bags" are lined with a conductive, metallic cloth, most likely copper, or nickel/copper. When properly closed, that bag will block/shield whatever is inside from electromagnetic fields. The field will flow around the outside of the bag, rather than penetrate.
BTW, did a little research and found that styrofoam contains a good amount of carbon, which doesn't act as a shield, but carbon absorbs RF energy. Apparently, it is a ".......hydrocarbon polymer; essentially, the majority of its structure is made up of carbon chains".
Old and gray, and still learning something new every day. View attachment 2174964
Yes, I'd love to forget about Styrofoam. Stick to graphite, or carbon fiber.
The carbon fiber bags and piece of cloth I ordered don't have copper. I looked and almost screwed up, changed my choice..
I looked into it, but Rf radio frequency, is different from Qf quantum frequency. A new term .If you honestly want to know something about RF absorbing materials, then read through this white paper done by Emerson and Cuming, true experts in the field. From this, I believe you will add a great amount of info to your knowledge base.
Microwave Absorbers for the Layperson | Cuming Microwave Corporation
The applications for microwave absorbers vary just as widely, from reducing the radar cross section of a stealth aircraft to the lining of antenna shrouds.www.cumingmicrowave.com
Also, Google this.."THEORY AND APPLICATION OF RF/MICROWAVE ABSORBERS", and look for the article hosted by NASASpaceFlight.com. It's a .pdf that I can't link directly. Ignore the equations and just follow the text..there is a world of knowledge there for you.
Doing this kind of research, and applying the information, will allow you to add some understandable science to your theories. If you ever expect your theories to have any credibility, it's going to take some science to back it up. This is a great place to start.
I think I have it. He had the same technology 25 yrs ago. Some of his numbers were right but I only checked a few. And some were wrong.Maybe someone here that understands frequency devices can explain how this guys Element frequency number list was made? Some are wrong, but some are right.. I'm confused?
When I figured a frequency for Cinnamon, I pulled the cinnamon frequency out of the cinnamon with a generator. Then I dowsed a second generators connection to a number that wasn't a master key. .7 khz. I haven checked to see if rusty brown is causing the cinnamon connection yet.. If someone else wants to confirm the cinnamon frequency, that would be nice..
But with the multiple numbers that seem to do the same thing, how do I find the purist one? More than one number dowses some specific elements. But how specific is the number, to the Element? 100%, 50%.. How would I figure that out? Why so many master key frequency numbers, mimic every atom during resonation, it doesn't make sence yet! What frequency would they have used to trigger a detonation?, in pagers.. frequencies in our realm wouldn't vibrate enough. They must be using a quantum frequency!
All I know is I need to figure a better way to dial a specific full frequency out of the quantum world. Not a partial one..
When I dowse and dial up a disease frequency, it needs to be pure, right? Or can we use a partial, maybe..
He musta used a silasidascope or something lol.. I have no clue!
That was it. The first number I checked was Aluminum at 22.36/7, and it is a master key, not a specific element number for aluminum. That's funny, the old guy invented a machine to resonate and mimic specific elements, and didn't realize he discovered master key frequencies, wow! Thanks, Bob for your contribution!I think I have it. He had the same technology 25 yrs ago. Some of his numbers were right but I only checked a few. And some were wrong.
That means he was struggling as a dowser at times. He was doing it the same way as I do, but must have only been using one device..
To confirm this theory, all I need to do is start dowsing every number on his list. If one number is a master key it will confirm my theory. He didn't know about master key frequencies, and he just picked the first dowsing response. I will check that tomorrow.
It took me 20 yrs to figure that one, dang!
But why so many master key frequencies?, I never thought one was possible when I discovered it. How can their be so many numbers that resonate everything? There must be a reason, or some kind of difference. We need to think on this! I have over 20 master key numbers now, and it isn't even a dent in the amount of numbers their are.. See, it doesn't make sense.. How can I figure this problem out?That was it. The first number I checked was Aluminum at 22.36/7, and it is a master key, not a specific element number for aluminum. That's funny, the old guy invented a machine to resonate and mimic specific elements, and didn't realize he discovered master key frequencies, wow! Thanks, Bob for your contribution!
Maybe it has something to do with matrix frequencies? There has to be way more matrix numbers than pure element, of course!But why so many master key frequencies?, I never thought one was possible when I discovered it. How can their be so many numbers that resonate everything? There must be a reason, or some kind of difference. We need to think on this! I have over 20 master key numbers now, and it isn't even a dent in the amount of numbers their are.. See, it doesn't make sense.. How can I figure this problem out?
When I figured a frequency for Cinnamon, I pulled the cinnamon frequency out of the cinnamon with a generator.
I don't understand frequency and harmonics much.. I just call a number a frequency, but I don't understand it..Can you explain this process in more detail? What did you use for a signal generator? How do you arrive at a number?
Also, have you considered that "master key frequencies" could simply be harmonics of other primary frequencies?
A master key pulls all frequencies into it. Dowse the frequency line of the object that you want the number to, by matching it to a drawn/drawing number..I don't understand frequency and harmonics much.. I just call a number a frequency, but I don't understand it..
I Dowse the number set on a signal generator. It's set in our realm and connected to the quantum side .
But that doesn't make sense. He dowsed a frequency of 22.365 kHz. He would have had to Dowse till he found a connection line to Aluminum. 22.365 times he dowsed. And the frequency he ended up with, was a master key? He would have found, 1.934 kHz master before 22.000 number. I'm confused again.. I still have to do it with 2 generators, not one.. But dowsing 22,000 times for a single frequency, before the next. All the elements would have to be lined up in a row, to Dowse them quick. How did he get their frequency without dowsing it.. Maybe he had some way he was resonating things? Then reading a displayed frequency.. I can't dowse quick enough to find germ matrix frequencies. If his frequency figuring technology is lost. It's in the electronics side, I don't know that stuff..That was it. The first number I checked was Aluminum at 22.36/7, and it is a master key, not a specific element number for aluminum. That's funny, the old guy invented a machine to resonate and mimic specific elements, and didn't realize he discovered master key frequencies, wow! Thanks, Bob for your contribution!