A GUIDE TO VAULT TREASURE HUNTING (Condensed)

[mtnmanpp]

You have more there than a turtle. Look to the right, it appears to be a shaft sign.

oh good catch i missed that. i wish i had more time to look the place over.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[deephunting]

A friend had the detect SSP51000 tried it on site
The is ground is very mineralized and was not able to discriminate it out kept only showing iron 90%
Good thing able to get a photo of this perfect Triangle
View attachment 2190999View attachment 2191000

How about it, the triangle is beautiful, the truth is about the detector, how much experience do you have about it, because I really take it as high as the terrain allows me whenever I take the 4 foot frame, because really the ferrous will respond more faster and deeper the noble metals go to a shallower depth than these for your area that you demonstrate the frame is perfect I walk in hills and very few areas I can afford to use only the 58X48 centimeter coil and I don't like it because the response to small objectives and the frame is more about what we are looking for

 

[getzwilder]

How about it, the triangle is beautiful, the truth is about the detector, how much experience do you have about it, because I really take it as high as the terrain allows me whenever I take the 4 foot frame, because really the ferrous will respond more faster and deeper the noble metals go to a shallower depth than these for your area that you demonstrate the frame is perfect I walk in hills and very few areas I can afford to use only the 58X48 centimeter coil and I don't like it because the response to small objectives and the frame is more about what we are looking for

The owner a friend of my partner and is very knowledgeable about electronics ironically he had just purchased and was trying it out
Bought on the the hopes it would work in our soil highly mineralized and a lot of hot rocks
Volcanic rocks I wasn’t there to see exactly how equipment performed tried several different locations and just kept reading
Iron 90%

 

[deephunting]

The owner a friend of my partner and is very knowledgeable about electronics ironically he had just purchased and was trying it out
Bought on the the hopes it would work in our soil highly mineralized and a lot of hot rocks
Volcanic rocks I wasn’t there to see exactly how equipment performed tried several different locations and just kept readin

It is ssp5100 detech, this one will not go deep for noble metals, it will respond well to ferrous objects since its frequency is 100 hertz to be more sensitive to noble metals, they must be higher, the one I use is more than 600, just do the test at air an object of the same size ferrous and noble, be it aluminum, bronze or copper, whatever you want and you will see that you will lose at least 30% of depth in the latter if the ferrous You grabbed it at 3 feet, the noble one will be at 2. We have to know our devices well, the capacity of the person who handles it. I also tell you that I am returning to previous places for the same reason.

 

[deephunting]

An apology to everyone if this message does not belong in this thread but I am aware that here we are the most interested in in-depth treasures

 

[getzwilder]

The owner a friend of my partner and is very knowledgeable about electronics ironically he had just purchased and was trying it out
Bought on the the hopes it would work in our soil highly mineralized and a lot of hot rocks
Volcanic rocks I wasn’t there to see exactly how equipment performed tried several different locations and just kept reading
Iron 90%

I checked back with my partner
Owner said that the detector a 5100 worked great for him at other locations in different soils

 

[deephunting]

I checked back with my partner
Owner said that the detector a 5100 worked great for him at other locations in different soils

The important thing is to know its capacity since the pulses that go to the air go to the ground, but the calibration on the ground will always affect this. The one I have takes a soda can at 100 centimeters at its maximum sensitivity, but I know that with Any stone with some mineral will give me a positive result.

 

[cyzak]

So working with the 5100 what depth was it actually able to detect at.

The important thing is to know its capacity since the pulses that go to the air go to the ground, but the calibration on the ground will always affect this. The one I have takes a soda can at 100 centimeters at its maximum sensitivity, but I know that with Any stone with some mineral will give me a positive result.

Can you please tell us what depth the 5100 was able to detach at sir.

 

[Carl-NC]

It is ssp5100 detech, this one will not go deep for noble metals, it will respond well to ferrous objects since its frequency is 100 hertz to be more sensitive to noble metals, they must be higher,

It's not just the pulse rate, it's also the pulse width and the sample delay. In fact, of the three parameters pulse rate makes the least difference. I have an SSP 2100, basically the same detector as the 5100. When I get time I intend to modify it for a wider range of usefulness.