Opium pipe?

mojjax

Silver Member
Feb 27, 2005
4,563
4,092
MAINE
🏆 Honorable Mentions:
4
Detector(s) used
Ace 250
Primary Interest:
All Treasure Hunting

Attachments

  • Picture 020 (2).jpg
    Picture 020 (2).jpg
    54.6 KB · Views: 1,477
  • Picture 024.jpg
    Picture 024.jpg
    45.2 KB · Views: 1,513
Upvote 0
i agree with the others who said this isnt a pipe. i used to be an expert on the subject ::) and i have never seen a hashish or opium pipe like that .
 

Upvote 0
bigcypresshunter said:
OK my mistake. I thought MiddenMonster said opium pipes needed the lid.

Actually I said they have a lid, but even that's not a hard and fast rule. This is a stereotypical opium pipe:

1615.jpg

The flying saucer-shaped bowl detaches from the pipe and is filled with opium. The pipe is reassembled, and turned upside down so that the flying saucer-shaped bowl is on the bottom. The bowl is held over a candle or other flame source. As the opium heats up the psychoactive compounds are released as they turn into a gas, which is inhaled by the user. It's the same process that occurs when tobbaco or anything else is smoked, or when anything is burned for that matter. The reason opium is smoked that way is because too much heat applied too quickly will destroy the psychoactive components of the opium before they are released into the smoke. To some extent this is true for all smokable substances. But all compounds have different temperatures where that destruction occurs. If you are a really cheapskate cigarette smoker the most efficient way to smoke tobbaco would be to put it in a glass pipe made from a flask and then heat the outside of the flask to the precise temperature where the nicotine is released, and inhale the smoke at that time.

I don't know that the object in question is a pipe for smoking. But I would bet money that it isn't an opium pipe. Following the process I suggested earlier could eliminate the pipe theory, unless it's a pipe that has never been used. If Mojaxx lives in a large town or city another possibility would be to take it to the police station and see of anyone there thinks it's a pipe.
 

Upvote 0
look at the bottom....Is that a hole?
 

Attachments

  • Pimojjax.jpg
    Pimojjax.jpg
    3.8 KB · Views: 928
Upvote 0
bigcypresshunter said:
Is that called "Chasing the Dragon", Midden?

Similar process, different drug. Chasing the dragon involved heroin, which came into being in the final years of the 19th century. Opium smoking predated the development of heroin.
 

Upvote 0
I was just checking it for residue and I found that it comes apart at the base .
 

Attachments

  • Picture 017.jpg
    Picture 017.jpg
    93.6 KB · Views: 718
  • Picture 012.jpg
    Picture 012.jpg
    94.4 KB · Views: 707
  • Picture 011.jpg
    Picture 011.jpg
    92.3 KB · Views: 675
Upvote 0
some sort of flow regulator water or gas maybe
a one way valve
 

Upvote 0
Baron Von De Kalb said:
some sort of flow regulator water or gas maybe
a one way valve

I agree, it looke like a part from a stove.

I think it's goes on an oil stove and that little deal that looks like a neddle jet, is just that. It would help if we could get a close up of the other end, that way I could see how the end is flared. Does it have a double flair of single flair?
 

Upvote 0
Michelle said:
look at the bottom....Is that a hole?
Mojjax.....why didn't you say so? I have to ask all the questions around here don't I ?hmm :D ;)
 

Upvote 0
I think it is a burner venturi from a gas stove or lamp.

DCMatt
 

Upvote 0
Thanks alot everyone, this thread has just helped me i.d this tiny bronze tool i found a couple of weeks ago.its about 1 and half inches long and is either a YEN HAUCK a small scaping tool to dislodge the residue within an opium pipe or a YEN TSHI a needle on which to heat the opium.i thought it was a piece of the usual tinpan junk and fold in chinese gold mining area.                                    TINPAN  ;D ;D ;D WILL POST TOMORROW
 

Upvote 0
mojjax said:
I was just checking it for residue and I found that it comes apart at the base.

Here's a new thought: Could it be an old version of the tool used to check the air pressure in tires? The sliding rod with the tick marks is missing, and would have slid back and forth inside the stem.
 

Upvote 0
Baron Von De Kalb said:
bill gent said:
u def don't want to travel around with that in your car especially at a DWI check point
yup the Gestapo might want to see your papers and search you
with no probable cause sept driving down a road that you pay tax's for :-X

Midden may be aware of this: having a Grateful Dead sticker on your car IS considered probable cause in the state of New Jersey. (After all, everyone knows we Dead Heads make LSD in our bathtubs and are always transporting large quantities of it around!)
 

Upvote 0
Captain Trips said:
Midden may be aware of this: having a Grateful Dead sticker on your car IS considered probable cause in the state of New Jersey. (After all, everyone knows we Dead Heads make LSD in our bathtubs and are always transporting large quantities of it around!)

Never heard that it was a legal foundation for probable cause, but I remember hearing that in the late 1980s the DEA sent out guidelines to law enforcement agencies that included Grateful Dead logos, roses, skeletons and the like as things to look for during traffic stops that might justify further investigation. I guess that means if you have a Grateful Dead sticker on your metal detector you're going to be rousted if the cops check you out while metal detecting. Who knows how many lists I'm on because of my "steal your face" avatar!
 

Upvote 0
RealdeTayopa said:
=Michelle
don't know about opiates....That's a badder...I took "DARE" in school.......hehehe
*******
Yeah, OF course!

Tropical Tramp
hehe ;)
 

Upvote 0
jeff of pa said:
Air hose End
MiddenMonster said:
Here's a new thought: Could it be an old version of the tool used to check the air pressure in tires? The sliding rod with the tick marks is missing, and would have slid back and forth inside the stem.
I think this needs more research.
 

Attachments

  • tire gauge.jpg
    tire gauge.jpg
    1.7 KB · Views: 556
Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top