A GUIDE TO VAULT TREASURE HUNTING (Condensed)

[sandy1]

I am soaking up as much of this as I can and doing my research here in Nevada. I have a question, for the larger markers, the notches from long distance for example, it seems to me that they would have to have removed a lot of material. If so, do you usually find piles of rock? or spoil piles like old mine?

I also have some GPS coordinates that show some items deep in the mountains and I would love to pick someone's brain on them. I don't quite feel comfortable sharing it on a forum but I would like to talk to someone in private to get your opinion on what you may thing they are.

I also think I may have to invest into a drone so when I go out in the field, I can quickly survey areas from above.

Keep up the great work everyone, I hope 2023 brings y'all health, and wealth.

I thought I would chime in on the tailings, for the most part the tailings from the carvings have all been removed (taken away) in order to make the areas look natural, however when you start digging at treasure locations you start digging up buried carved markers such as hearts and diamonds which means they moved a lot of earth around.

The carved Triangles are pretty much the final markers to the caches, as far as distance markers the favorites are long rock pointers that they lay next to larger important boulders so you will look at them from the side to see which way they point.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[cyzak]

Cyzak, I may have missed this before because I don't remember seeing this photo but down in the lower right it looks like the number 12 or possibly the number 2 inside a pentagram. it is on the rock by the yellow flowers.

Or am I pointing out something already discussed and looking like a fool? I do a lot of that lately lol

No there is no drawings, but this brings up a good point. There is so much miss direction on these sites. If you start trying to read all the rocks or drawings on them instead of looking for all the important markers you will be completely lost. The very first thing is catching a real treasure aura you will find a marker such as this triangle close by these triangles are very important because they have degrees on them. This is all explained in Sandy1 guide read the guide go out and follow the direction we all must crawl before we walk.
Also to comment on your question about is there material left over from a site that the Spanish were at. There will not be any type of recognizable rubble they totally removed it just like Sandy1 explained. I have walked past Spanish mines 20 times not even knowing they were there they were very good at concealing the portals and caching's. I hope this helps keep up the hard work it will payoff it is out there.

 

[cyzak]

HI Sandy, No Disrespect –

Don't Feel Sorry for me Sandy - I have followed Bart for years –
And I have found a lot of information that was relevant out in the Field,
when it comes to learning how the "Spanish Surveyed their Mining Sites".
And yes, there are things we save and some we throw way.

I try to Educate and put out different Ideas to try and learn from that helped me.
and gives the Treasure Hunter Ideas to try and see if this information is relevant to them.

But its up to each individual person -
To put in the time and energy to gain knowledge.
Just like you did - by testing it on their own sites.

Your posting a Triangle Teaches Nothing.
How is one suppose to learn from this kind of Knowledge?
How is one suppose to use this out in the field?
Does nothing but create speculation.

And those who come here to learn – Just leave here with Disappointment.
And its a wonder, that they leave with a bad taste in their mouth, about this subject.

Lost Horse

Seeing how Bart's information was posted on my thread I wanted to make sure nobody thought I endorsed anything the man had to say and yes I have known Bart for years.

The purpose of me showing a triangle is to let people know when they do find a triangle like the one In my picture that they are within 200 feet of a cache, and I did show how to use it way back on this thread with the 130 foot triangle.

Also I would prefer people leave my thread with a bad taste than to leave with information that is complete and udder nonsense.

Lost Horse I do not believe your You Tube video of Bart has any business being on Sandy1 thread. I know you have your own threads and that's were it should be. If people want to follow your treasure beliefs let them follow you on your own threads.

 

[AeroMike]

My Technical Guide to Vault Treasure Hunting (Aura Capturing)


(#1)
Now that I have covered the basics of vault treasure hunting, its time to cover the technical aspects of locating these treasures.


(#2)
The First thing to understand is that I use Auras to locate these treasures:
I capture these auras with a Pentax Optio w10 camera and have gotten over 100 long distance auras from different treasures with this particular camera (all from at least a half mile away from the mountain) however (There are different cameras that can capture these auras as well)
Ones I know for sure are the (iPhone 7) and the (Pentax Optio w30)
As long as the camera can take multiple pictures automatically called interval or timelaps shooting with a intervalometer, which means you can set a time in between each shot, on the w10 the minimum is 10 seconds in between each picture taken, and it will take a thousand pictures, it takes about 3 hours to get all one thousand pictures.

You need to make sure whatever camera you try that it has the ability to automatically take pictures without you taking the pictures yourself.

It is very difficult catching Auras even with a camera, these Auras are faster than lightning and happen in full daylight, this also makes them invisible to the human eye.
Many times it will take thousands of pictures to capture just one aura, even when you are taking pictures of a mountain that has multiple caches on it.

Here is how the auras are created, The Aura phenomenon:
There is intermittent radiation that comes from the sun and hits different areas of ground sporadically and this happens very fast within a hundreth of a second, if this radiation happens to hit on a buried treasure(s) and you happen to be taking a picture of that area within that 1/100 of a second (with the right camera) you will capture a Photon Burst/Aura that is a result of the radiation bouncing/reflecting off of the treasure. This also has to do with solar winds/geomagnetic storms which effect the earths magnetosphere.


Here is the Equipment that I use in order to capture the auras from the buried treasures.
You can buy these on ebay.
Camera Pentax Optio W10 (discontinued, must buy used)
2: (New Batteries) for the same camera and a (Charger)
2: (SD 2GB Memory Cards, Full Size not Micro) (NOT the SDHC cards)
1: (Tripod for the camera)
1: (SD Memory Card Reader with USB connection, for transfering pictures to your computer)


(#3)
How to Capture Aura(s):
(Camera Instructions for the Pentax Optio W10)
(Use a 2GB SD (not sdhc)
(Don't Forget to Format)
How to format the memory:
Install the SD card

Turn on camera by pushing and holding the small round button on top, then push the lowest button on back closest to screen (Menu Button). Then locate the 4 buttons surrounding a circle button the middle is the Ok button and the four around it are for navigating: First screen will be Rec. Mode navigate to the right then you are in settings navigate down and format is lit up, navigate right and then up and then hit the OK middle circle button and that formats the memory.
(Charge Batteries)

(Read the formatting instructions first)

Turn on Camera
Push bottom left button (Menu Button) closest to the screen and navigate down to recorded Pixels and set at 6M (7M if using the w30) by navigating right and using the OK button then go down to Quality level and set at 2 stars make sure to press OK to set it, this makes sure you get 1000 shots on your memory card.

Now push lowest left button (Menu Button) again to get back to the picture taking screen.
It should say you have close to 1300 Pictures (just over 1000 on the w30) available in the upper right with a 2GB memory card.

If you have issues with sunlight changing due to shade from trees and clouds its a good idea to set the white Balance for Daylight.(this option is in the menu just below the settings for the Pixels and Quality)

Now back to the Navigation buttons: Push the upper of these five buttons several times untill you see (Drive mode interval shoot on the screen)

Now Push the middle round OK button of those five buttons Twice until interval lights up in Pink.
The Interval needs to be set at 10 Seconds
Navigate down onto Number of Shots Navigate right and up or down to get 1000 shots if you are at 2 it will jump to 1000 if you go down one click, Make sure to Click OK button to set it. (Start time leave at 0) Click Ok again and the fields go grey (no more Pink) then it will go back to the ready to take a picture screen in a few seconds.

Now Hit the right Navigation button three times for infinity shooting this keeps it from running down the battery because of autofocusing on every picture. Make sure to Hit OK to set it.


If everything has been done correctly you should have a: (P in white in the upper left corner This is what programming mode it is in) (if using the w30 you must make sure the P is being used not the auto pict to change this you have to push the Mode button just under the OK button) (a no flash sign) (the interval shooting sign) and (the little mountain sign for infinty shooting) on the upper left of the camera.
There should be around 1300 shots available on the upper right or just over 1000 on the w30. (Not all 2GB SD Cards Hold the Exact Same Amount of Pictures, as long as it holds more than 1000 pictures your good to go)


Where to set up the camera


Set up the camera on a steady tripod around 1/2 of a mile from the hill.


(Look at Picture #1a for an example of the very best distance for capturing auras from a hill. (You can zoom in a bit from this distance also)

View attachment 1496553

What's important is that you are close enough to see the Foliage/Trees etc. on the hills in the pictures.(you will need these later for alignment purposes)
Get at LEAST 1/8 of a mile of mountian in the picture, this increases your odds of catching an aura by covering lots of ground (the treasure is probably in a place your not expecting) also further away from the mountain helps for better pinpointing, this is very Important because you want to capture the entire aura on the mountain, if you are too close to the mountain, you may only catch a small part of the aura (because it is a photon/light burst bouncing off the treasure from the sun ) and catching only a portion of it can make the aura difficult to pinpoint on the mountain.


(Look at Picture #1b which is about a mile from the hill but zoomed in quite a bit) (This is the absolute furthest from the hill you should ever try to take pictures from)

View attachment 1496554


(VERY IMPORTANT make sure to mark the tripod spot for later) Take pictures During daylight hours (while sun is up) (Do not point the camera towards the sun, you don't want colorful prisms of light on the pictures from the sun)
Then just zoom in or out on the hill and click the shutter button it will start taking pictures every ten seconds for about 3 hours. make sure to check/verify that the the camera is coming on every ten seconds for a couple shots (you will see it flash onscreen for a second while it is taking the picture, the screen goes black in between the shots.)
It can take up to ten thousand pictures to capture an aura even in a good treasure area.
(these auras are rare and hard to capture)
(Take these camera instructions with you on site, in case any questions arise about how to use)


(#4)
Here is what you need to be able to scan/look for an aura:
First you need a full size monitor/tv 19" is a good size.
Second, you need a Photo Viewer that is fast and also Overlaps one picture Directly over the last one shown. (Side Scrolling Photo Viewers Do Not Work)

I use Honeyview for this purpose, this is the ONLY way to find an aura as each picture is shown over top of the last one and allows you to see a small anomaly very quickly as you look through each picture that replaces the last one.

I use a simple magnifying tool on windows 10 from the Windows ease of access menu, this allows me in conjuction with honeyview to look at a specific section of each picture by magnifying it up to 300 or 400 percent while I am scanning through each photo for an aura.

The Picture before the Aura will have nothing and then the Next picture with the Aura and then the picture after the aura will have nothing on it, which is telling you the aura was just in that one picture.


Make sure that what you think is the Aura is not a Bird or a Bug or Pollen which can be in the air close to the camera. General rule of thumb, if you see something in your photos in more than 1 picture within a series of ten pictures its probably birds flying around the mountain or bugs/pollen close to the camera. The auras are much more rare than that. You will see a few white or cloudy blotches in some pictures (probably dust particals in or on the camera lens) here and there (up in the sky etc.) that are not treasure which is why it is imparative that you verify the aura with the markers at the aura's location.


In my area the auras are generally, mostly white with some black mixed in (as the aura burns out they show more black) Sometimes I will Catch a Gold Aura as well. (I ignore the black ones as they are generally birds) Remember these auras only last a split second.


(#5)
After finding an aura:

(print the aura picture) take that picture and a better camera back to the exact tripod spot you caught the aura from and (take zoomed in pictures of the aura spot with the better camera)

(Make an extra copy of your aura picture)

(Using the computer paint program) Make a plus (+) mark on the copied aura picture (using the line tool on the shapes toolbar, no freehand drawings) (the brightest part of the aura goes in the middle of the plus) Make sure the lines of the plus are exactly horizontal and vertical and very long for accuracy. Try to copy/transfer the exact location of the aura onto the new zoomed in picture with a plus (+) mark. (SEE VERY IMPORTANT BELOW and the Example Pictures) (Aura spot goes in the middle of the plus (+) on the new zoomed in picture) (be aware that you can easily be off up to 10 feet on the hill from human error as it is not always easy to make a perfect transfer from the aura picture to the zoomed in picture especially if the aura is big and not pinpointable) (Look for the brightest spot in the aura, usually that is the exact spot to put in the middle of the plus on your picture) (Print this zoomed in Plus marked picture)

(VERY IMPORTANT) Make absolutely certain that when making the plus on the new zoomed in picture that the ends of the plus are as long as you can get and touching bushes or something that is identified in the first aura picture, because taking the zoomed in picture will almost always be at a slight angle to the original aura picture, which means that the Plus mark lines will most likely not be horizontal and vertical (most likely the whole plus will be angled or tilted left or right) unlike on the first aura picture plus which has perfect horizontal and vertical lines, this can really throw off the location.

EXAMPLE Picture #2 : Picture #2 is a picture of 3 separate auras/treasures with the left aura marked with a Horizontal and Vertical Plus.
(This picture #2 has been cropped down, it was originally showing a half mile of mountain and was taken a mile away from the mountain)

View attachment 1496555

EXAMPLE Picture #3 : Picture #3 is the zoomed in picture of the same marked aura spot on the mountain as picture #2. (Picture #3 was taken from the exact same tripod spot as the original #2 aura picture was taken from (a mile from the mountain) with a much higher resolution Camera)
Notice how the Plus is NOT horizontal and Vertical on picture #3 but at an angle this is due to human error on the angle of the camera either on the tripod (not being level) or while taking the zoomed in picture by hand (Be very aware of this difference and compensate for it by using the bushes rocks etc. as guides just as I have in this picture)

View attachment 1496556

(#6)
After Finding the Aura on the original Picture and transferring it to the second Much Better Picture with a plus mark, it is time to go to the aura site:

Using two people with walkies or phones, one person stays at the original aura picture tripod location with the marked zoomed in photo and the other person goes to the aura location on the mountain.

(Don't forget your drinking water)

(Important Make sure the Person on the mountain is wearing a:
(Neon Yellow Shirt) and (Sitting Down) so the person at the tripod spot can be more accurate in pinpointing)

The person (at the tripod spot where the aura was originally caught ) using binoculars pinpoints the person on the mountain with the plus mark on the zoomed in picture which should be the aura spot on the mountain (use the bushes trees etc. to visually match up the plus spot in the picture to the aura spot on the mountain) (getting the person dead on the plus/aura spot is critical for success, assuming that the plus was accurately marked on the picture as well)

(I have had to redo the plus transfer of the aura to the better picture on occasion to be more accurate)

After pinpointing the person on the plus/aura from the original tripod spot that you first caught the aura, take another zoomed in picture (with the best camera) of the person on the mountain in the neon yellow shirt sitting down. After pinpointing and getting the picture of the person on the aura spot/mountain have the person on the mountain build a marker at that exact pinpointed aura spot.

(Make sure the person while making the marker on the hill does not take from or disturb any logs or piled rock markers/cairns he/she might find on the hill near the aura as these could be very valuable clues put there by the Modern Day Sentinels maybe even marking the dig spot)

Then take that picture and look at it on your computer and match it up with your plus marked picture to see if the person was pinpointed correctly on the mountain before going out to the mountain in case there needs to be an accuracy adjustment.

At this point you should have 3 separate pictures of 1 spot on the hill (the original aura picture, the zoomed in and printed picture with a plus mark and the final picture of your partner in neon yellow on the spot) All of these should have been taken from the original tripod spot you caught the first aura from.

Next the tripod spot person goes out on the mountain with the person that built the marker on the mountain (together) and relocates the marker (this is not always as easy as it sounds since it looks much different from the tripod point of view then when actually on the mountain looking for the little marker, the builder of the marker is the only one who knows what the mountain looks like at the spot as well as what kind of marker he/she built)

My goal here is to help people find the many buried treasure locations (by using auras) and give everybody a better understanding of what kinds of markers you will find/see at actual real treasure sites (with pictures) since that is what has been so sorely missing in most of the books that have been published. (You can view the different markers found at treasure sites in my guide by clicking on the first link in my signature below)

Enjoy

Sandy1, thank you so much for this knowledge. I have printed this out and I went and ordered two Pentax cameras, and extra batteries and will be taking the camera up and trying them out. I figured what is better then one camera....TWO! So I will set up both and see what results I get.

 

[sandy1]

Happy to help Mike there is quite a bit of knowledge that I have not shared online but I will if you get to the point that you have caught an aura and verified you have the markers such as alignments an owl and/or a Carved triangle at your aura area.

 

[Quinoa]

There's a lot of the same marker shapes/types that are reused on these sites and it's difficult to decipher which is which or what it used for what. It seems they reused and re-positioned much of it (who ever was the last to visit the site, whether it be another treasure hunter, or some spanish or equivalent group). At some point you have to have a basic map to go from, and even then , it will not always be the same from one place to another, or one part of the US to another... it's just trying to narrow things down. The whole aura concept is meant to take away some of the guessing where you are at in the realm of things.

 

[Lost Horse]

Quinoa Wrote - here's a lot of the same marker shapes/types that are reused on these sites
and it's difficult to decipher which is which or what it used for what.

Hi,
As you have stated that when you find a site, “Not a Dig Site, a Mine Site”
There is a lot of confusion when you start to search for the so called “Standard” Markers.
With only the Dig Site in mind.

When Markers of all kinds start to show up, some big and some small.
Take into account that you can get less confused if you realize that these markers,
you find mite have been used to “Survey The Mining Site”.

This is the Knowledge that Cowboy Bart Jeppesen was Putting Forth –
Not so much about Locating a Dig Site.

Not all Bart's Finding are Standard - Only in his Mining Site, where they were being used.
It was Surveyed in the Shape of the Streets of Jerusalem. -
Influenced by the Culture that created it.

And there were hundreds of these markers, spread out among the Mine Site,
that causes confusion. That were used to Survey the Site.

Other sites, of course will be Different, depending on who is doing the Survey.
Where are they from Germany, South America, Spain, Most were Masons / Jesuits,
and of course their Nationally and Spiritual Beliefs,
are Influenced by the Culture of the Artist that created them.

This will have a Big Influence, on the way they put together the site.

But you will find a lot of the Markers still being used are “Standard”
Not just in the Mine Site, but also on Trails coming and going, and as Compass Points.

Most people always look for the Treasure / Dig Site – but most people don't take the time, or
Realize the Site was Surveyed just like we do today, when we Claim a Mining Area.
And so Confusion sets in.

The Area had to be Mapped out and Registered with the Government.
Its The Law, just like today.

And of course if the Government is over seas, a Map of the area and trails,
have to be created and sent in to be Registered with the Government.

This Is something to take into concentration, when out in the Field.

As I have said before in my post – I work like an Archaeologist and gather data
and when I find something to dig – I don't go in like gang busters using a Backhoe,
and or moving Rocks Around.

I work the site slowly, this is why the photos I post are of Quality
and clear for other to see and learn from,
and get an understanding what is being put forth.

Its up to the Treasure Hunter / Individual to figure this out,
and to Back Engineer each site, for they are all different.

The more information that we gather in our tool box, and the more we share,
the more we will come to an understanding, of this Governments Occupation,
and hopefully be less confused out in the field.

We are here, because this is a Learning Process, for all of us.

Lost Horse

 

[cyzak]

Seriously Lost Horse watch your youtube video of Bart starting at 26.45 to 30.00 can you take that serious.You say a bad taste in peoples mouth give me a break. Sandy1 is trying to give the correct information with this thread that he has worked so hard on, all this does is set it back with bad information you have posted.

Quinoa Wrote - here's a lot of the same marker shapes/types that are reused on these sites
and it's difficult to decipher which is which or what it used for what.

Hi,
As you have stated that when you find a site, “Not a Dig Site, a Mine Site”
There is a lot of confusion when you start to search for the so called “Standard” Markers.
With only the Dig Site in mind.

When Markers of all kinds start to show up, some big and some small.
Take into account that you can get less confused if you realize that these markers,
you find mite have been used to “Survey The Mining Site”.

This is the Knowledge that Cowboy Bart Jeppesen was Putting Forth –
Not so much about Locating a Dig Site.

Not all Bart's Finding are Standard - Only in his Mining Site, where they were being used.
It was Surveyed in the Shape of the Streets of Jerusalem. -
Influenced by the Culture that created it.

And there were hundreds of these markers, spread out among the Mine Site,
that causes confusion. That were used to Survey the Site.

Other sites, of course will be Different, depending on who is doing the Survey.
Where are they from Germany, South America, Spain, Most were Masons / Jesuits,
and of course their Nationally and Spiritual Beliefs,
are Influenced by the Culture of the Artist that created them.

This will have a Big Influence, on the way they put together the site.

But you will find a lot of the Markers still being used are “Standard”
Not just in the Mine Site, but also on Trails coming and going, and as Compass Points.

Most people always look for the Treasure / Dig Site – but most people don't take the time, or
Realize the Site was Surveyed just like we do today, when we Claim a Mining Area.
And so Confusion sets in.

The Area had to be Mapped out and Registered with the Government.
Its The Law, just like today.

And of course if the Government is over seas, a Map of the area and trails,
have to be created and sent in to be Registered with the Government.

This Is something to take into concentration, when out in the Field.

As I have said before in my post – I work like an Archaeologist and gather data
and when I find something to dig – I don't go in like gang busters using a Backhoe,
and or moving Rocks Around.

I work the site slowly, this is why the photos I post are of Quality
and clear for other to see and learn from,
and get an understanding what is being put forth.

Its up to the Treasure Hunter / Individual to figure this out,
and to Back Engineer each site, for they are all different.

The more information that we gather in our tool box, and the more we share,
the more we will come to an understanding, of this Governments Occupation,
and hopefully be less confused out in the field.

We are here, because this is a Learning Process, for all of us.

Lost Horse

 

[AeroMike]

Ok I have another question about Aura's.

Hypothetically... you take a photo with an Aura, you follow it up and let's say you locate what produced it. My question is does the volume of material determine how big an aura is? so for instance would 10 bars of gold produce a much larger aura then say one bar of gold or one can of gold dust/coins . OH! that brings up another question, would the type of gold also produce different size of aura? for example, raw gold nuggets versus refined gold coins or bars?

As always, your time and knowledge is much appreciated!

One last thing, I still would like to converse with someone an open forum. I have GPS coordinates I will share, and have you take a look and just give me your opinion on what you think. If it was about aircraft I am your expert but I am a noob amongst you experts when it comes to this subject.

 

[sandy1]

Most auras are the same basic size which is usually around 10-20 feet however I do have an aura that is at a major accumulation room where they loaded up a wagon which has a very large aura about 70 feet across and a kings triangle that marks it. There isn't really any way to know quantity or type from an aura however I have caught different color auras such as white some mixed white and black and even gold.

 

[Quinoa]

I'll chime in briefly on Bart. I would really avoid Bart's information, it's impossible to even understand a lot of it because it's a bunch of ramblings meant to make you buy his books. He even said to understand one book you have to buy and read the next. I used to follow him on social media a bit, almost lined up a trip with him to one of my areas about 8 years ago, but canceled it the more I learned about him. I know a lot about him but that's a whole long story, I will leave you with this, the last thing he said on social media was he "was catching a ride off this rock" meaning leaving earth. That's how far off the cliff he went.. and about as far off the wall his methodology was in treasure hunting.

 

[sdcfia]

Quinoa Wrote - here's a lot of the same marker shapes/types that are reused on these sites
and it's difficult to decipher which is which or what it used for what.

Hi,
As you have stated that when you find a site, “Not a Dig Site, a Mine Site”
There is a lot of confusion when you start to search for the so called “Standard” Markers.
With only the Dig Site in mind.

When Markers of all kinds start to show up, some big and some small.
Take into account that you can get less confused if you realize that these markers,
you find mite have been used to “Survey The Mining Site”.

This is the Knowledge that Cowboy Bart Jeppesen was Putting Forth –
Not so much about Locating a Dig Site.

Not all Bart's Finding are Standard - Only in his Mining Site, where they were being used.
It was Surveyed in the Shape of the Streets of Jerusalem. -
Influenced by the Culture that created it.

And there were hundreds of these markers, spread out among the Mine Site,
that causes confusion. That were used to Survey the Site.

Other sites, of course will be Different, depending on who is doing the Survey.
Where are they from Germany, South America, Spain, Most were Masons / Jesuits,
and of course their Nationally and Spiritual Beliefs,
are Influenced by the Culture of the Artist that created them.

This will have a Big Influence, on the way they put together the site.

But you will find a lot of the Markers still being used are “Standard”
Not just in the Mine Site, but also on Trails coming and going, and as Compass Points.

Most people always look for the Treasure / Dig Site – but most people don't take the time, or
Realize the Site was Surveyed just like we do today, when we Claim a Mining Area.
And so Confusion sets in.

The Area had to be Mapped out and Registered with the Government.
Its The Law, just like today.

And of course if the Government is over seas, a Map of the area and trails,
have to be created and sent in to be Registered with the Government.

This Is something to take into concentration, when out in the Field.

As I have said before in my post – I work like an Archaeologist and gather data
and when I find something to dig – I don't go in like gang busters using a Backhoe,
and or moving Rocks Around.

I work the site slowly, this is why the photos I post are of Quality
and clear for other to see and learn from,
and get an understanding what is being put forth.

Its up to the Treasure Hunter / Individual to figure this out,
and to Back Engineer each site, for they are all different.

The more information that we gather in our tool box, and the more we share,
the more we will come to an understanding, of this Governments Occupation,
and hopefully be less confused out in the field.

We are here, because this is a Learning Process, for all of us.

Lost Horse

https://www.treasurenet.com/threads/who-owned-those-spanish-mines.278600/

 

[sandy1]

Since it seems Mining keeps getting introduced into this thread in order to disprove these treasures exist due to the lack of mining records I want to make sure everybody understands this thread has Nothing to do with mining.

This is a Treasure Thread about processed treasure that is buried in Vaults in the ground by the Europeans and marked with what they considered Holy degrees and measurements from man made carved markers and are in most cases far away from any mining areas.

So any argument about no proof of mining is not relevant at all because I never went into anything at all about how the treasure was acquired on this thread nor will I as the history is not important if you are trying to find treasure.

People who don't use Auras along with the markers to locate the treasures will try to convince you that you need to do all kinds of research for records, documents and maps, this is simply not true, auras will get you within 50 feet of a treasure that you won't find any paperwork or story on.

What I am saying is I didn't create this thread for Armchair treasure hunters, Hobbyists, Historians, Archaeologists, Legend hunters, Story chasers or anybody who are trying to document these treasures. I made this thread for serious treasure hunters, who want to bypass the nonsense.

 

[AeroMike]

Since it seems Mining keeps getting introduced into this thread in order to disprove these treasures exist due to the lack of mining records I want to make sure everybody understands this thread has Nothing to do with mining.

This is a Treasure Thread about processed treasure that is buried in Vaults in the ground by the Europeans and marked with what they considered Holy degrees and measurements from man made carved markers and are in most cases far away from any mining areas.

So any argument about no proof of mining is not relevant at all because I never went into anything at all about how the treasure was acquired on this thread nor will I as the history is not important if you are trying to find treasure.

People who don't use Auras along with the markers to locate the treasures will try to convince you that you need to do all kinds of research for records, documents and maps, this is simply not true, auras will get you within 50 feet of a treasure that you won't find any paperwork or story on.

What I am saying is I didn't create this thread for Armchair treasure hunters, Hobbyists, Historians, Archaeologists, Legend hunters, Story chasers or anybody who are trying to document these treasures. I made this thread for serious treasure hunters, who want to bypass the nonsense.

I know I, and many others, really appreciate you putting this together with your knowledge. For me, this has literally jumped me light years ahead of where I would ever be when it comes to understanding auras with treasure sites. More than I could learn in this lifetime on my own for sure.

I have ADHD or, so I am told, so sometimes when I talk or start thinking of things, I get sidetracked by the preverbal squirrel, lol If anything, I am good for amusement.

 

[Secret squirl]

I know I, and many others, really appreciate you putting this together with your knowledge. For me, this has literally jumped me light years ahead of where I would ever be when it comes to understanding auras with treasure sites. More than I could learn in this lifetime on my own for sure.

I have ADHD or, so I am told, so sometimes when I talk or start thinking of things, I get sidetracked by the preverbal squirrel, lol If anything, I am good for amusement.

ADHD?? Are you psychic too and referring to me? LOL

 

[sandy1]

I want to remind everybody to turn on your Signatures found in your profiles under signature then preferences then content options (check the box show peoples signatures with their messages) there are links in everyone of my posts as well as many other peoples that you miss out on with it off.

 

[sdcfia]

The King of Spain demanded his quinto del rey be paid in physical bullion when the miners returned to Mexico City. The proof of this requirement and how it was enforced is available for anyone who cares, both in the TNet archives and from their original documentation. If you're willfully ignorant, then just ignore the facts and carry on.

Yes, mining counts. People who truly believe that the European miners left the Crown's share hidden somewhere beyond the Northern Frontier, requiring an expensive and risky expedition in order to locate it somewhere near the mine sites are delusional. How and by whom do folks believe these metals came to be recovered in the first place? Why do they believe the miners came home without them? Wishful thinking? Too many treasure magazines?

Frequently, to avoid these sticky issues, hopefuls claim these alleged caches were left by "the Ancients." Except for the Caballos, on the Rio Grande, with a once easily navigable route to the Gulf of Mexico, I've yet to hear another plausible argument for this, but I'm all ears.

Photographically captured "auras" are perturbations of the earth's electromagnetic field caused by random changes in the constant bombardment of gamma radiation from space. I suppose you can aim a camera in any direction, take 10,000 photos and find one if you're patient. On the other hand, "gold auras" (blue light resembling a methanol flame), caused by bullion off-gassing from shallow caches during certain atmospheric conditions (lightning storms during high humidity), are genuine, but seldom witnessed.

I can take anyone on a hike within a half mile of my house, pick out a random location, then show them any number of formations of rocks occupying perfect triangular patterns within view of the starting point.

True believers believe, which is fine. Go for it. I'd be a true believer too if someone would prove to me my belief was well-founded and verifiable.

 

[sandy1]

People who Don't use Auras along with the markers to locate the treasures will try to convince you that you need to do all kinds of research for records, documents and maps, this is simply not true, auras will get you within 50 feet of a treasure that you won't find any paperwork or story on.

Also real treasure hunters should be very wary of those same people who say that the Auras are not from treasures and that the carved markers such as the Triangle and Owls are completely natural and not man made at the aura/treasure locations.

The truth is they just don't want you to know about these treasures and will do what they can to deny their existence.

 

[deephunting]

Chair to left eagle for me, and front this mark have mark whit the pulse induction front the chair sorry for Bad writing

 

[deephunting]

I have started to think about the detail that many alignments and carvings are almost similar, I tell my colleagues that they are also looking so they really had a lot of free time or they really hid something because in reality it has to be a true craftsman the one who did the work and in the second team a specialist to read what was left well, greetings and indeed it is difficult but nobody said it was going to be easy.