🔎 UNIDENTIFIED What kind of pliers are these?

USERNAME IS VALID

Full Member
Feb 27, 2016
209
377
Norcal
Detector(s) used
XP DEUS II
XP DEUS
TESORO VAQUERO
Primary Interest:
All Treasure Hunting
I found these and cleaned them up, tip has about a 3/16" gap and cutter.

IMG_0670.jpg
 

Attachments

  • IMG_0669.jpg
    IMG_0669.jpg
    42.3 KB · Views: 37
ahh scotch locks....a way to truly piss off any proper electrician. Almost no applications where it is considered a proper component. In fact even illegal in some applications in certain areas for very good reason. never ever use these things they should be illegal across the board in my opinion.
 

Upvote 3
They work ok for some things. I have used them for wiring in a trailer plug set, a couple of times. Wrapped well in electrical tape. Many moons ago.
 

Upvote 0
I hate scotchlock wire nuts but the connector that those crimp work good on phone wires.scotck lock is a brand...many connector types.
 

Upvote 1
ahh scotch locks....a way to truly piss off any proper electrician. Almost no applications where it is considered a proper component. In fact even illegal in some applications in certain areas for very good reason. never ever use these things they should be illegal across the board in my opinion.
:laughing7: I used to use tiny ones for low voltage swimming pool computer connections and telephone line connections because they self sealed with silicone and the wires wouldn't corrode in chemical rooms and kept them waterproof.
 

Upvote 2
This is the scotchlok connector that I use that these pliers would crimp.....but I just use my adjustable wrench.
 

Attachments

  • 20220721_202204.jpg
    20220721_202204.jpg
    55.2 KB · Views: 34
Upvote 1
:laughing7: I used to use tiny ones for low voltage swimming pool computer connections and telephone line connections because they self sealed with silicone and the wires wouldn't corrode in chemical rooms and kept them waterproof.
I have personally seen a fire develop from these things at work, as well as in someone's car. They might be ok for very low voltage, but I still will never ever trust them. I mean a car is 12v dc.... pretty low voltage....still lit that thing on fire. All it took was a little oil splatter to help her burn
 

Last edited:
Upvote 1
I have personally seen a fire develop from these things at work, as well as in someone's car. They might be ok for very low voltage, but I still will never ever trust them. I mean a car is 12v dc.... pretty low voltage....still lit that thing on fire. All it took was a little oil splatter to help her burn
Are we talking the same thing here? I used these for 35 years and never once had a problem. How many amps are you putting through a 24 gauge telephone or communication wire?

 

Last edited:
Upvote 3
Are we talking the same thing here? I used these for 35 years and never once had a problem. How many amps are you putting through a 24 gauge telephone or communication wire?


I was talking about these, because I thought these were what they were talking about. These are for twelve volt.

connector1.jpg
 

Upvote 2

Top Member Reactions

Users who are viewing this thread

Back
Top