Masonic ring

mrcolin2u

Jr. Member
Dec 23, 2004
72
178
🏆 Honorable Mentions:
1
Detector(s) used
Tesoro Bandido II umax
Fisher CZ20
Minelab Excalibur II 10" coil
Primary Interest:
All Treasure Hunting

Attachments

  • IMG_6454.jpeg
    IMG_6454.jpeg
    227.7 KB · Views: 69
Upvote 27
Yes, a great find. Congrats. Here's something to chew on.
Could be that from long-term wear, the maker's marks & karat stamps were rubbed away. Or, it was made pre-1900 when karat stamps were not required. I notice that around the masonic symbol, that the gold shows a dark brown color. Did you polish the ring & were not able to reach those spots? The reason I ask this is because a gold ring, if not 24k (pure gold), will tarnish to that dark brown color to varying degrees if in the salt water a LONG
time. It's the alloys (brass,, silver, copper, for example) that lead to the tarnishing on un-pure gold. My guess is that your ring is very old.
Nonetheless, nice hefty hunk, & a great find.
 

Yes, a great find. Congrats. Here's something to chew on.
Could be that from long-term wear, the maker's marks & karat stamps were rubbed away. Or, it was made pre-1900 when karat stamps were not required. I notice that around the masonic symbol, that the gold shows a dark brown color. Did you polish the ring & were not able to reach those spots? The reason I ask this is because a gold ring, if not 24k (pure gold), will tarnish to that dark brown color to varying degrees if in the salt water a LONG
time. It's the alloys (brass,, silver, copper, for example) that lead to the tarnishing on un-pure gold. My guess is that your ring is very old.
Nonetheless, nice hefty hunk, & a great find.
Yes Jose I cleaned the ring around the raised masonic logo and the opposite side where the ring may have been brazed or perhaps some type of solder ? I believe it is gold and the dark areas are maybe the silver content that has leached out over the years from whatever method they used to construct this ring .
I think it has been in the water a very long time .
I also found a ladies wedding ring set with diamonds which was an old fashioned design and it too had a very small area where non gold metal had leached out and stained a dark color . This particular ring was stamped 14K .
The masonic ring was only stained at the logo and the "seam" at the bottom of the ring , otherwise it came of the water all clean and shiny.
I found the ring in the carribean sea off a hotel beach which may not have existed when the ring was originally lost .
 

It's nice to hear that you found it in the waters of the "Carib". Great place to hang out & look for old stuff in the water. It kind of looks like it might have been hand made by someone who wasn't a professional jeweler. The masonic symbol itself is not a perfect work of art & maybe that's why there is no maker's mark or karat stamp.(Just a speculation). But, as we know, The Masons go way back so there's no telling how old it is. Would be interesting to know how it checks out karat wise after being tested.
Oh how I wish I could get back to "The Carib" to snorkel around and look for stuff. Those were my favorite times.
Get back there as much as possible & enjoy yourself if you can. Great find. I hope it checks out to be 18K or higher.
Thanks for sharing. J.T.G.
Stuff found in Anguilla & St. Maarten.jpg
 

Very nice find. It appears to be a fairly plain ring, based on hundreds of Masonic rings I’ve seen.
However, that is not a negative comment. Yours may be quite old.
I consider it true treasure and am glad you recovered it.👍🏼
 

Great FIND !!! Is there a way to trace the owner ?
 

Very nice find. It appears to be a fairly plain ring, based on hundreds of Masonic rings I’ve seen.
However, that is not a negative comment. Yours may be quite old.
I consider it true treasure and am glad you recovered it.👍🏼
Yes I do believe it is a very old ring , the engraved lines on the side is something you don’t see in modern rings also the lack of any hallmark . I can tell the ring was worn for a very long time before it ended in the water .
 

Top Member Reactions

Users who are viewing this thread

Back
Top