Garrett Ace 400 air test numbers

[Got-Good-Tones]

Just curious...anybody do an extensive "Air Test" of various objects with the Garrett Ace 400 (I.E. - Coins, Nails, various objects...etc...etc) and log the results in a Excel spreadsheet?

Thinking about making up a personal VDI chart for out in the field...quick reference...etc...etc.

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[bowwinkles]

I have experienced a vast amount of drift in the numbers whether it is in ground or air. At best with my 400 I only get a general idea of the target if I get anything at all. I have been very un happy because of the long hours of use and marginal results. The ground balance thing is my thought as being the reason for the variation.

 

[bayhawk2]

"Garrett Ace 400 air test numbers"

I have a Garrett ACE 400 and actually love it.Mine came with the 8 1/2" X 11" DD coil in which I never used.I sold it and bought the 5 X 8" coil.
Readings on the 5 X 8" coil were constant on targets.IE: quarter was 87-88.Then the bad happened.One of the ears broke on the coil.
Under warranty,Garrett replaced it.And the numbers changed.After just a short time,once again an ear broke.Very thin ears.i then
had it replaced with a 6 1/2 X 9" coil.Much better.Thick ears.a bit heavier but it still does what I wanted.One thing
I have discovered with my ACE 400 is that every coil I've used on it,including a 15 X15" Cors coil,read different.
My advise is to air test many objects.Mine doesn't differ hardly at all whether the object is in air or ground.
I can't tell you what my coil reads compared to yours,due to knowing
no two read the exact same.One coil may read a quarter at 84-85.another exact same model coil may read it 88-89.
One thing is for sure the one you have will read the same.So get used to yours.The more you use it the more
you will get used to it.My opinion..Good luck and good hunting.