Boat ownership.......the pitfalls and the pleasures....

priyanka chopra will warm you up
 

Nida Core is expensive. I've used the Penske products in the past with good results for the customers that could afford it.

Of course it's expensive. It's marine related.

B.O.A.T. = Bring Out Another Thousand.
 

Update,

Scuba Tank holders going in, we are dropping the bottom of the 14 tanks through the floor into the bilges to get weight both forward ( port side 6 ) and lower with the 8 aft, 4 either side leaning against the outer hull in compartments (8 inch PVC pipe)

ImageUploadedByTreasureNet.com1417204665.437212.jpgImageUploadedByTreasureNet.com1417204693.868993.jpg
 

Last edited:
How many divers do you take out?

sent from a potato with gravy!!...
 

Not many one or two when I do take people out but if I go on an exped for a few days I want to be able to do a bunch of dives each day without having to lug my compressor. Hence the floor fridge ha ha,
 

Not many one or two when I do take people out but if I go on an exped for a few days I want to be able to do a bunch of dives each day without having to lug my compressor. Hence the floor fridge ha ha,

Do you ever anchor and sleep in the cabin? It always scared the crap out of me when I did that. I was always scared something would happen in the middle of the night, like with Mel Fisher's son.
 

Jason,
I am with you on that. I sleep in the middle of the back deck under the Bimini on a camping pad I have a towel ready to throw over my head if I am too close to shore and the bugs are biting and a tarp ready to throw completely over me if it starts raining as the Bimini is high off the deck

Too hot in the cabin too, did I say it gets used in the " Bahamas" ha ha
 

How far out do you have to be to have no bugs?

sent from a potato with gravy!!...
 

Depending on the breeze or wind anything from a few hundred yards if it's breezy to half way to Africa if it isn't!!

If there is no wind you literally can't be within site of land without getting bothered, a mile is too close here.
 

Last edited:
Floor starting to go in now, also trailer day today front wind on support welded on and axles welded direct to frame as the springs disintergrated, no need for springs here......

ImageUploadedByTreasureNet.com1417463651.066286.jpgImageUploadedByTreasureNet.com1417463665.757076.jpgImageUploadedByTreasureNet.com1417463684.524779.jpg
 

Floor starting to go in now, also trailer day today front wind on support welded on and axles welded direct to frame as the springs disintergrated, no need for springs here......

View attachment 1086713View attachment 1086714View attachment 1086715
Wow, I thought you were joking about welding the axles! Floor is looking great though. My hubs are being delivered today and springs should be here late this week. It will be spring before I install all of it though as winter is setting in hard now...

How far are you pulling the trailer?

sent from a potato with gravy!!...
 

Max about 5 to 6 miles over good roads about 35 mph.

Not interested in investing hundreds of dollars in a trailer that's not worth hundreds of dollars.....
 

Max about 5 to 6 miles over good roads about 35 mph.

Not interested in investing hundreds of dollars in a trailer that's not worth hundreds of dollars.....
I can understand that. You could always just run a lower tire pressure to soften the ride some.

sent from a potato with gravy!!...
 

Floor in now ( hatches to be cut later) tank cupboards finished port and starboard.

Gap at the rear for batteries and the oil tank for the 2 stroke engine, bilge pumps going in tomorrow at the rear

ImageUploadedByTreasureNet.com1417561273.006258.jpgImageUploadedByTreasureNet.com1417561288.192746.jpgImageUploadedByTreasureNet.com1417561301.289866.jpg
 

Its really taking shape now! What are you going to use for a floor covering? Paint?

sent from a potato with gravy!!...
 

Gel coat with sand in it for the floor, smooth gel coat for all horizontal surfaces.....
 

How are you applying the gelcoat ? I think it can be sprayed, brushed and rolled? Or am I mistaken?

sent from a potato with gravy!!...
 

Spraying it ......... Maybe roller or brush in areas the gun can't get....
 

Top Member Reactions

Users who are viewing this thread

Back
Top