- Sep 26, 2006
- 572
- 254
- Detector(s) used
- Excalibur 1000
- Primary Interest:
- Beach & Shallow Water Hunting
Does anyone know where I can get a 15” wot coil for an Excal II ?
Upvote
0
Wot coil for Excalibur
- Thread starter teklord
- Start date
WaterWalker
Hero Member
- Jan 31, 2007
- 532
- 693
- Detector(s) used
- Garrett (Infinium, ATPro, ATX), Minelab Excalibur, Tesoro Conquistador, Whites (Surfmaster PI, Quantum), JW Fisher 8X, DetectorPro Underwater 8", Minelab Equinox 800, Manticore, Pro-Find 35
- Primary Interest:
- Beach & Shallow Water Hunting
Unfortunately the Australian company no longer lists them in their catalog. NOS at some dealer may have one.
Good luck in finding one.
I had about 4000 hours on my first WOT, it failed, I repaired it with the manufacturer's help. It lasted another 3000 hours. I then put on a new WOT coil and when it gave up its last target I went back to the original 1000's coil. The WOT worked well on the original Saber, and a couple of 1000s. I now swing the Excalibur 1000 and a Manticore with the M15 coil. I still have the two failed coils and may try a repair on them.
Good luck in finding one.
I had about 4000 hours on my first WOT, it failed, I repaired it with the manufacturer's help. It lasted another 3000 hours. I then put on a new WOT coil and when it gave up its last target I went back to the original 1000's coil. The WOT worked well on the original Saber, and a couple of 1000s. I now swing the Excalibur 1000 and a Manticore with the M15 coil. I still have the two failed coils and may try a repair on them.
Top Member Reactions
-
3452 -
2208 -
2042 -
1157 -
1050 -
987 -
846 -
845 -
812 -
784 -
775 -
620 -
592 -
564 -
556 -
450 -
439 -
432 -
420 -
E
418
