{Sentinel}
Silver Member
- Joined
- Jan 11, 2007
- Messages
- 4,739
- Reaction score
- 286
- Golden Thread
- 13
- Location
- Virginia
- 🥇 Banner finds
- 13
- Detector(s) used
- TEKNETICS T-2 LTD, Fisher F-75, White's MXT w/ 11 x 14" Excelerator Coil, WHITES Pulse TDI, WHITES Beach Hunter ID, Garrett Propointer and Lesche Digging Tool
- Primary Interest:
- All Treasure Hunting
What's going on guys! Today, Jeff and I decided to head back down to one of my old honey holes that I've been digging at on and off for the last couple of years, the same one that Jeff dug the stellar 1861 Half Dime at a few days ago. As I told him the other day, "there's still more stuff in here to be found" well we found out just how true that was AGAIN today! After a couple hours of digging we wandered into one of the areas that use to be an old colonial homesite on the top of a hill and we began to get the nice iron signals all over. Now up until this time we had only a few bullets between us and we were just leisurely swinging and all of a sudden I got a NICE signal hitting in the 70s and I at once called Jeff over to listen to it with his machine....he came on over and scanned it and agreed it was hittting in the 70s on his too! I sank my shovel in and dug a nice BIG hole and dug down about 5" and then started probing the hole with my Propointer. When it started freaking out, I rubbed the side of the hole with the tip and suddenly a silver milled edge was exposed and both Jeff and I was thinking Reale at that point!!! When I popped it out, it didn't quite look right for a Reale and I was thinking, is that King George?? NOPE, after blowing the loose dirt away I could see William in Latin on the edge and at that point knew almost certainly that it was a William III shilling but STILL couldn't believe it and had to get Jeff to confirm what I was seeing 
Indeed, thats what it is he said! My nerves were shot at that point as it was in unbelievable good shape! Hands down the BEST milled coin I've ever dug! When we got back to the house, Jeff grabbed his 1697 William coin from earlier this year that we thought was a shilling. Turns out, we measured them and Jeff's is a sixpence (21 mm) and mine was the shilling (25mm). Enjoy the pictures! JoshHere's a couple in-situ shots after rinsing with water about five minutes after dug
Look at the gilding left on this flat button that was about 20 yards from the coin
1695 William III Shilling
Jeff's 1697 sixpence next to my 1695 shilling
Upvote
0
a bullet and couple other little things 
They dont come any better then that one. 
