🔎 UNIDENTIFIED What kind of knife is this. Measures 25 inches

oldbattleaxe

Sr. Member
May 26, 2010
403
241
Detector(s) used
Technetics
20241114_155242.jpg
 

Nice find, no info written on knife visible, looks like a homemade Bowie or Arkansas Toothpick. Just my uneducated guess.
 

Upvote 2
Upvote 3
How thick is the blade?

From here it looks like a heavily modified machete. Possibly a Corona. Looks like some lettering on the left side up near where the clip starts.
My first thought was a Martindale crocodile machete. But, those are usually marked well.


Get some 1000 grit or higher sand paper.
Use a sand block or something really flat and lightly sand the blade near the handle.
0000 steel wool will work but it can go down into marks and mess them up.
The sand paper only does the top flats so you can see what's possibly there.
 

Last edited:
Upvote 1
How thick is the blade?

From here it looks like a heavily modified machete. Possibly a Corona. Looks like some lettering on the left side up near where the clip starts.
My first thought was a Martindale crocodile machete. But, those are usually marked well.


Get some 1000 grit or higher sand paper.
Use a sand block or something really flat and lightly sand the blade near the handle.
0000 grit steel wool will work but it can go down into marks and mess them up.
The sand paper only does the top flats so you can see what's possibly there.
The blade is thin. Not forged. I will use sandpaper and see. I didn't want to damage it.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top