What is it?

oldmillman

Greenie
Jul 16, 2013
13
2
Primary Interest:
All Treasure Hunting

Attachments

  • CM150705-07092401.jpg
    CM150705-07092401.jpg
    32.1 KB · Views: 120
  • CM150705-07045903.jpg
    CM150705-07045903.jpg
    31.8 KB · Views: 121
  • CM150705-07030001.jpg
    CM150705-07030001.jpg
    28.6 KB · Views: 113
  • CM150705-07050904.jpg
    CM150705-07050904.jpg
    30 KB · Views: 115
Congratulations! You may have found an actual meterorite. Maybe. There are still things that need to be done to prove a meteorite.

First, your specimen is smallish, with numerous pockmarks (called regmaglympts if real). The glassy appearance of the surface in photo 3 is somewhat suspect, unless you have intentionally attempted to clean the stone. If you have tried cleaning the stone, the portions cleaned should be saved for future reference.

You need to make a "window" into the stone, then provide a photo as close as possible to the stone for analysis. If this is a real meteorite, getting a "window" is going to take a lapidary saw. It is important to place the "window" where it will be the least noticeable, but provide a view of the exterior and the interior of the stone. The "window" should be at least 1 cm square, if possible. If real, the "window" should show a fusion crust 1/8" thick or so, plus a mostly iron interior which should have Widmanstatten diagrams on the cut surface. These diagrams can be etched with acid later for further proof.

Then post the photo here for further analysis.

All I can state at this point is your stone looks promising. Private message me for further discussion.
 

Congratulations! You may have found an actual meterorite. Maybe. There are still things that need to be done to prove a meteorite.

First, your specimen is smallish, with numerous pockmarks (called regmaglympts if real). The glassy appearance of the surface in photo 3 is somewhat suspect, unless you have intentionally attempted to clean the stone. If you have tried cleaning the stone, the portions cleaned should be saved for future reference.

You need to make a "window" into the stone, then provide a photo as close as possible to the stone for analysis. If this is a real meteorite, getting a "window" is going to take a lapidary saw. It is important to place the "window" where it will be the least noticeable, but provide a view of the exterior and the interior of the stone. The "window" should be at least 1 cm square, if possible. If real, the "window" should show a fusion crust 1/8" thick or so, plus a mostly iron interior which should have Widmanstatten diagrams on the cut surface. These diagrams can be etched with acid later for further proof.

Then post the photo here for further analysis.

All I can state at this point is your stone looks promising. Private message me for further discussion.
Wow,thanks for the detailed response,the 3 rd pic was taken wet,I was trying to show the shade of it.The window you are talking about seems complicated, or is it just a cut? I will have to figure out how to do that,I do have a small 5" tile saw,will that work?
 

Sure a tile saw will work with a diamond blade and water. It's easy The etching process is a tad more complicated. There is probably a Youtube out there. You might not need to etch to know if it's real.
 

I would say YES.... but as a layman, test it. (congrats to you!) TTC
 

Top Member Reactions

Users who are viewing this thread

Back
Top