H-2 CHARLIE
Bronze Member
- Dec 1, 2012
- 1,204
- 507
- Detector(s) used
- Gold bug pro / Minelab GM 1000
- Primary Interest:
- All Treasure Hunting
Can a high quility high banker be made into a dry washer puffer [12. v ]
Turn a Highbanker in to a dry washer PUFFER ?
- Thread starter H-2 CHARLIE
- Start date
OP
OP
H-2 CHARLIE
Bronze Member
- Dec 1, 2012
- 1,204
- 507
- Detector(s) used
- Gold bug pro / Minelab GM 1000
- Primary Interest:
- All Treasure Hunting
- Thread starter
- #2
NO IDEAS GUYS ?
There would be so much fabrication you might as well start from sratch...
First you woul have to cut out all the sheet metal on the riffle tray part. Depending on what kind of riffles you have reverse them AND modify them.
Why destroy a expensive high banker when you could make a dry washer for way cheaper and probably just as easy/ I would even think easier.
First you woul have to cut out all the sheet metal on the riffle tray part. Depending on what kind of riffles you have reverse them AND modify them.
Why destroy a expensive high banker when you could make a dry washer for way cheaper and probably just as easy/ I would even think easier.
bill-costa rica
Sr. Member
buy or build a puffer, then you will have both a wet and dry setup. just a thought.
bill/cr
bill/cr
Hoser John
Gold Member
Constant flow offset elliptical vibration has much better recovery and 10X the processing power BUT trying to turn a hb into a drywasher is like turning a he into a she--may look ok but will NEVER work out right-See this forums drywasher forum for insight as good info there Dry VS Rocker or fluidized bed threads or some such--John
Top Member Reactions
-
3475 -
1973 -
1908 -
1157 -
1091 -
1009 -
889 -
863 -
860 -
793 -
756 -
676 -
659 -
567 -
508 -
453 -
447 -
410 -
400 -
E
398
