Supposed to be out in 2016

Chad1972

Chad1972

Full Member
Feb 17, 2015
207
85
Abilene TX area
Detector(s) used
1 Garrett AT Pro with Nel Sharpshooter coil, 1 AT Pro with a Nel Attack coil, and an Ace 250 (kid's), AT ProPointer, White's TRX pinpointer, Lesche Sampson shovel, Garrett 10" trowel, Viking Digger, S
Primary Interest:
All Treasure Hunting
And somebody needs to tell them it's AT Pro not AP Pro...
 

They have been out for a while now with the 1/8" and 1/4" jacks. You can plug them into the adaptor cord or make your own. Still only splash proof so a waterproof connector isn't really going to help except for getting rid of the adaptor cable.
 

Whats the price ?
 

Well, I ordered one. It'll be here in about a week. I'll let y'all know if they're worth a crap or not.
 

Metal Detecting Stuff said:
We have some of them in stock and more on the way! They work great. There are several different configurations: WA wireless for AT Pro, W3 Wireless for 1/8 inch jack, W6 Wireless for 1/4" jack, and WR for using your own headphones. They are rechargeable through a USB cable.

Wayne

www.metaldetectingstuff.com
Click to expand...
Wayne I have a very good pair of Bluetooth headphones I just need the part that goes on the ATPRO I have the adapter so 1/4" or the ATPro end will work?
 

So you can buy the W3's with headphones for $2 less than you can buy the WR module without headphones?
 

pencil5757 said:
Wayne I have a very good pair of Bluetooth headphones I just need the part that goes on the ATPRO I have the adapter so 1/4" or the ATPro end will work?
Click to expand...

I'm not sure your headphones will pair with the module. I'll have to see if the 1/4" W6 works through the Garrett headphone adaptor.

Wayne

Www.metaldetectingstuff.com
 

I noticed that all the pictures of them have a different padding for the ear than the set that was shown in the video review...:icon_scratch:
 

Showtime2385 said:
I noticed that all the pictures of them have a different padding for the ear than the set that was shown in the video review...:icon_scratch:
Click to expand...

The actual earmuffs have a leather like look to them. The pictures on my site are straight from Deteknix's website, I'll have to take some photos to replace, thanks for pointing it out.

Wayne
 

Prices run $88-99.99 depending on model. Just realized my links above are just to the pictures. I'll correct them in a bit.
 

Metal Detecting Stuff said:
Rob, the WR has a transmitter and receiver. The main advantage of the WR is the ability to use your favorite headphones.

Wayne

Www.metaldetectingstuff.com
Click to expand...

Gotcha, so the models that come with the headphones only work with those brand wireless headphones that come with it and not aftermarket Bluetooth headphones?
 

RobRieman said:
Gotcha, so the models that come with the headphones only work with those brand wireless headphones that come with it and not aftermarket Bluetooth headphones?
Click to expand...

Rob,

I really don't know if they would pair up with a different brand. I don't have any aftermarket Bluetooth headphones to test.

Here are the corrected links with pricing:

Wa for AT Pro $99.99
W6 for 1/4" jack $91.99
W3 for 1/8" jack $89.99
WR for wired headphones $89.99

IMG954597.jpg

IMG958817.jpg
Wayne

Deteknix ? tagged "headphones" ? Metal Detecting Stuff
 

Is there any signal lag with this setup? I'm very interested. Getting tired of the brush ripping my ears off. Lol

HH, Relic Nut
 

You must log in or register to reply here.

A Little Coin Ring Crafting Tonite As I Tumbled My Pennies.............

⬅️ Previous Thread

Pinpointer batter cap replacement

Next Thread ➡️

Top Member Reactions

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
High Plains Prospectors

Latest Discussions

Back
Top