Some Stuff i finally preserved

JakePhelps

Silver Member
Jul 7, 2005
3,020
16
Massachusetts
Detector(s) used
Tesoro Cibola

Attachments

  • ironstuff1.JPG
    ironstuff1.JPG
    48.2 KB · Views: 424
  • ironstuff2.JPG
    ironstuff2.JPG
    47.6 KB · Views: 427
  • somestuff.JPG
    somestuff.JPG
    49.9 KB · Views: 416
It can do that :o Well it hasnt so far :D I only apply enough to make it shiny and create a barrier though. Sometimes i apply a second coat though ::)
 

There are preservative waxes you can buy. In a pinch and for something of little value,
you can use candle wax. Just rub it on the item.
 

I have tried andle wax and some other waxes but they just dont seem to work as tehy are too thick and pasty. But i did find that crisco doesnt go bad, I dug out some iron things that i had used it on last summer and they seem to have stayed in good condtion and the crisco didnt go rancid :D
 

not sure, I have tried alot of stuff and found its all too thick and leaves the metal looking crappy :-\ What exactly is linseed oli, i forget ???
 

Jake,

nice artifacts.

For some reason I love those porcelain canning lids.

Good cleaning job.

have a good un.............
SHERMANVILLE ILLINOIS
 

All my jar lids came form one dump site, Ill post some of them sometime. Btw-does anyone know what this thingy is? I circled it.
 

Attachments

  • ironstuff2edited.JPG
    ironstuff2edited.JPG
    43.7 KB · Views: 361
Heres a few pics of some stuff. The first one is my area i clean finds in(I soak em in water untill i can get around to preserving them. The next pic is a strap hinge from an old barn that i am cleaning, the next pic is of my collection of porcelain lined jar lids and stuff, heres a few iv got so far: Consolidated Fruit Jar Co. Boyd's Genuine Porcelain Lined A.C. Smalley & Co Boston & New York The Hero Glass Works Philadelphia Pa and a few others.... The next pic is a mini jar lid.
 

Attachments

  • minilid.JPG
    minilid.JPG
    47.6 KB · Views: 365
  • Jarlidcollection.JPG
    Jarlidcollection.JPG
    47.4 KB · Views: 367
  • straphingecleaning.JPG
    straphingecleaning.JPG
    51.5 KB · Views: 358
  • Cleaningarea.JPG
    Cleaningarea.JPG
    41.1 KB · Views: 364
And heres a Victorian-Era Soapdish that is broken.
 

Attachments

  • soapdishmaybe.JPG
    soapdishmaybe.JPG
    20.1 KB · Views: 352
Well, I researched linseed oil and discovered it's great for wood, cheap, and can spontaneous combust! Store rags soaked in it in a can UNDER WATER. http://www.naturalhandyman.com/iip/infxtra/inflin.shtm

So much for that stuff! Doesn't mention metals, so I would say forget it.

I like the soap dish. Do you suppose you could sand down the edges where it's broken and put it back in use? Still has a rather nice shape. Or is that considered a no-no ???

Noodle
 

Its actaully not that sharp, because its made of milkglass and has been worn down from being in the ground.
I use it to put my cleaned coins on next to the sink when i get back from detecting ;D
 

After you clean your iron items and you've applied the crisco. If they are small items that will fit in your oven, turn the oven up to 400 degrees and let it set for about 30 minutes. This will let the crisco get into the pores of the iron. This is how I season my cast iron cookware. You will not have to worry about it rusting.
 

Never thoguht of cooking it, but i do leave it in the sun for a day or two and keep applying new coats till its done, i guess i was doing a slower form or cooking it ;D
 

Heres the strap hinge, its finnaly done being preserved.
 

Attachments

  • StrapHinge.JPG
    StrapHinge.JPG
    28.4 KB · Views: 305
Speaking of hinges here is another one from the 1950's with the lock stil attached. The strap hinge above is from the 1800's.
 

Attachments

  • Hingewithlock.JPG
    Hingewithlock.JPG
    28.6 KB · Views: 299
Thanks for the advice conservator :) I think I should make some form of electrolysis machine.... But being 15 and broke i think it may be kinda tough, is there an easy way to make an electrolysis machine from say, household materials and such? I know of the one floater made, but i find some pretty large iron relics and i dont think a coffee container would handle it :-\ I have some kiwi shoe polish but ill have to buy some of the other stuff. Thanks once again conservator, you are a great help on this site :)
 

Top Member Reactions

Users who are viewing this thread

Back
Top