Simplex ground balance question.

[Rustycans]

Hello, my father and I have recently gotten back into detecting after a 20 year hiatus. I am running an Garrett at max and he is running a Simplex. For some reason his balances at much lower numbers - 30 to 45 when mine will be usually in high 70s to mid 80s. If I manually turn his to numbers similar to mine it seems to run a lot quieter. Is this normal or am I just stuck on my Garrett numbers? Any help appreciated.

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[vpnavy]

I noticed this was your very first post - so, Welcome Aboard Rustycans!

If no one can identify your find - you might consider posting your question on BRANDS > GARRETT > GARRETT AT MAX for more exposure...

 

[crashbandicoot]

Hello, my father and I have recently gotten back into detecting after a 20 year hiatus. I am running an Garrett at max and he is running a Simplex. For some reason his balances at much lower numbers - 30 to 45 when mine will be usually in high 70s to mid 80s. If I manually turn his to numbers similar to mine it seems to run a lot quieter. Is this normal or am I just stuck on my Garrett numbers? Any help appreciated.

I don,t know,but welcome to Tnet,you,ve come to the right place!

 

[Diggen It 1900]

I don,t know,but welcome to Tnet,you,ve come to the right place!

I really don't know but my simplex out of the box grounds at about 90. Let us know.
Brian

 

[oldmxrat]

My Simplex+ always balances somewhere between 77 and 89.

 

[Rustycans]

I really don't know but my simplex out of the box grounds at about 90. Let us know.
Brian

Tried just running at 90. Seemed to run fine. Even found a few tokens and US Army service collar disc at about 7-8 inches. Tried manual adjusting and numbers came up around 30 again…not sure.

 

[eyemustdigtreasure]

The Simplex + would balance near the same numbers....(if) and only if you both were way apart from each other or the other machine was off...,
Ground Balance over SAME PATCH of ground, with no EMI in area, too...!
THAT would be a good test, to answer all questions on differences of MACHINES and Ground Phase!

 

[Richard Guy]

It could be a matter of indicators just being indicators, the electronics are not the same between the two units, not to mention component-creep.