Questions for infinity jet users

[mike(swWash)]

I want to build a 2 or 3 inch dredge using an infinity jet and find little information available online to give me some basic answers.


Stupid question #1. Does the infinity jet go on the intake end of the slurry suction hose like a regular nozzle or farther down the line closer to the sluice?


Stupid question #2. If I use a 2" trash pump, should I use a 2 or 3" suction inlet and hose for the slurry intake.


I'm sure I'll have more questions later but until I start building it I don't know what they'll be.


Thanks for the help....

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[russau]

SQ#1 for optimum linear water flow ,the venture should be 10 times the diameter of the hose. but ive seen them shorter and still work ok! SQ#2 DONT use a trash pump for a dredge ! and on most pumps youll need a larger supply than the outlet . this is so that you wont starve out the pump! it sounds like youd be better off buying a used BUT not abused dredge if you want to get some dredgeing in this summer! otherwise youll probly end up like I did 17 years ago and have to keep fiddeling / modifying it to make it work somewhat!

 

[TheEquineFencer]

http://www.treasurenet.com/forums/d...stion-about-nozzle-suction-2.html#post4538952 go to post #26 and check it out...