✅ SOLVED No clue what this is

Lanesmom

Jr. Member
Mar 28, 2020
45
70
South Carolina
Detector(s) used
Garrett 250
Primary Interest:
Metal Detecting
Dug this up in area where I have found lots of stuff from late 1700’s to mid 1800’s. However, people have hunted and thrown random garbage on my property for 100+ years. So not sure if this broken metal object is old or from 1970 😁
it almost appears to have had possibly green paint or some type of metal sealant on the front. Also might have had a circular (but broken) shape on end. Any ideas would be great
* would someone be kind enough to explain how to mark items “solved” I found some instructions from years ago and that did not work
thanks
 

Attachments

  • 4B644668-3729-4253-84DE-662DAB3AE158.jpeg
    4B644668-3729-4253-84DE-662DAB3AE158.jpeg
    453.5 KB · Views: 146
  • BE64BC48-0CC2-4497-875E-8E1994D5097C.jpeg
    BE64BC48-0CC2-4497-875E-8E1994D5097C.jpeg
    440.6 KB · Views: 114
Lock side plate off a gun.
(Opposite side of stock from hammer.)
Blackpowder era.

The screws went through your piece into the lock plate on the other side.

Your side plate could be shaped by the builder.
By region and by "school" and by personal whim of the builder if desired.
You dig into it enough in research and you might find if it was made in your area ,or farther away.

Gun parts could be bought by a builder too. But soft brass made it easy to change the shape....
 

Attachments

  • R (7).jpg
    R (7).jpg
    41.1 KB · Views: 37
Last edited:
Upvote 8
Lock side plate off a gun.
(Opposite side of stock from hammer.)
Blackpowder era.

The screws went through your piece into the lock plate on the other side.

Your side plate could be shaped by the builder.
By region and by "school" and by personal whim of the builder if desired.
You dig into it enough in research and you might find if it was made in your area ,or farther away.

Gun parts could be bought by a builder too. But soft brass made it easy to change the shape....
Oh my lord, i would never in a million years known what this was. Can’t thank you enough!!! I will do some research and see what i can find as far as mfg company
 

Upvote 3
I am going to agree with Lanesmom I think maybe a side plate off of rifle or shotgun
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top