Mi6 issues

[the_mad_cladder]

I have owned the mi6 for the past year and it is the biggest pain. It almost constantly makes noise. I have posted on this before and have been unable to find a remedy. I often am forced to hit the button several times on harder to find targets. It works but it’s just really noisy. Being near power lines is not the issue or my cell phone. I’ve tried everything. Does this thing have a reset? I’m considering getting a carrot.

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[Truth]

I went with the Minelab pin pointer and don’t like it at all. I’m going back to the carrot I swear I ordered 2 today. Good luck brotha

 

[vferrari]

Have not had a noise problem with it. Problems with it reliably connecting in wireless mode but that seems to have been resolved with the latest updates.

Do you turn it on with the tip touching the ground to balance it so it is not as noisy when you first turn it on?

Are you using it wirerlessly or standalone? If wirelessly, what Deus software version are you running?

What audio mode are you using (pitch or tone) if in wirerless?

How high do you have sensitivity set?

It is normal to repeatedly have to touch the button to reduce sensitivity as you zero in on the target. That is how a carrot works too. I like the fact that it is super sensitive and that you can reduce sensitivity incrementally with button pushes. I have noticed that it sometimes seems to get "reset" on sensitivity and you have to rebalance, but other than that no issues.

 

[signal_line]

Yeah, try to run maybe like 45 on Sensitivity in the Pinpointer menu.

 

[the_mad_cladder]

Have not had a noise problem with it. Problems with it reliably connecting in wireless mode but that seems to have been resolved with the latest updates.

Do you turn it on with the tip touching the ground to balance it so it is not as noisy when you first turn it on?

Are you using it wirerlessly or standalone? If wirelessly, what Deus software version are you running?

What audio mode are you using (pitch or tone) if in wirerless?

How high do you have sensitivity set?

It is normal to repeatedly have to touch the button to reduce sensitivity as you zero in on the target. That is how a carrot works too. I like the fact that it is super sensitive and that you can reduce sensitivity incrementally with button pushes. I have noticed that it sometimes seems to get "reset" on sensitivity and you have to rebalance, but other than that no issues.

I usually run in either 35 or 45 sensitivity. I used the latest update on my deus and run the pinpointer connected to the deus. I use pitch I believe. I usually start it touching the ground but not always. One of my hunting buddies has the same setup but doesn’t experience the same issues.

 

[vferrari]

Try swapping pinpointers with your buddy (i.e., pair your pinpointer with your buddy's machine and his with your machine) to see if the problem follows the pinpointer.

 

[eman1000]

I love my stealthy MI6 and I run the sens at about 40 anything higher than 45 and I start having issues detecting multiple targets. The Research feature has saved me twice already so I'm going to have to hook up a lanyard just to be safe.

I just wonder if your running sens too high?