Metal Detecting a Lakeshore park YIELDS 6 coins

metalman2024

Jr. Member
Oct 28, 2024
24
41
GTA, Ontario
Detector(s) used
Whites GMT
Fisher F-Pulse pinpointer
Garrett Ace 300i
Primary Interest:
Metal Detecting
Metal detecting a park not too far from 19th century buildings did not yield 19th century coins unfortunately. All within 3" to 4" of the top of the turf. I seem to dig only the ones that register on my pin-pointer.

I suppose there were two targets that made my GMT detector hum but did not register on my pin-pointer I should have dug them out but did not. They might've been the 19th century coins I was after.

But not a bad bunch of 5 Canadian modern coins and one Chinese coin I think.
 

Attachments

  • IMG_4745.JPG
    IMG_4745.JPG
    1.7 MB · Views: 36
  • IMG_E5021.JPG
    IMG_E5021.JPG
    2 MB · Views: 25
  • IMG_E5022.JPG
    IMG_E5022.JPG
    1.8 MB · Views: 25
Upvote 10
All within 3" to 4" of the top of the turf. I seem to dig only the ones that register on my pin-pointer.
You should dig the other signals too. Just because they're too deep for the pinpointer to see them, they will still not be so deep that you can't dig them easily. You never know what you might be missing unless you dig it up...
 

You will miss good stuff if you don't dig! My wife is a ring finder. On her detector pull tabs' nickels and rings read 20/22. At a swimming area I watched her dig 24 pull tabs, number 25 was a $2ooo platinum diamond ring.
 

The pinpointer is only good for a certain depth.
The detector can easily detect 2x that depth for a coin.

Your just digging modern clad. The park I believe your in certainly has good history.

I recovered silvers 6-10" from the said park.
Now for the query:
Why didn't you dig the deeper targets?
 

Nice finds !

Not all the time but most of the time the older targets are deeper.
Decaying grass and leaves turns into a little bit of topsoil every year.
Now multiply this very thin layer of topsoil by 100 or 200 years.
It can add up to several inches or more of dirt over the older targets your after.

Good Hunting !
 

Metal detecting a park not too far from 19th century buildings did not yield 19th century coins unfortunately. All within 3" to 4" of the top of the turf. I seem to dig only the ones that register on my pin-pointer.

I suppose there were two targets that made my GMT detector hum but did not register on my pin-pointer I should have dug them out but did not. They might've been the 19th century coins I was after.

But not a bad bunch of 5 Canadian modern coins and one Chinese coin I think.
Nice!!! Congrats!!!
 

You should dig the other signals too. Just because they're too deep for the pinpointer to see them, they will still not be so deep that you can't dig them easily. You never know what you might be missing unless you dig it up...
Thank you for the encouragement and the education, I honestly hear ya, while the benefits would outweigh the work done, a signal yielding a depth of 8" is almost guaranteed to be a coin from the 30s/40s era at least, the very low sound wasn't encouraging enough especially when the location is not too secluded, the calculations in my head included those of 1) human proximity factor 🧑‍🤝‍🧑 as I am calling it along with 2) "what the heck :nono:are you doing to the park with an 8" hole and similarly deep" factor and the 3) what-if just aluminum/bottle cap 🍬factor after all that work factor? If you multiply the 3 together, giving each factor my approximate weighting score, say, 30% x 50% x 10% , I got 1.5% encouragement to dig! ; ), I just got to find me more promising and secluded areas that do not have a lot of trash!! It just might be a tall order! The research involved appears daunting.
 

You will miss good stuff if you don't dig! My wife is a ring finder. On her detector pull tabs' nickels and rings read 20/22. At a swimming area I watched her dig 24 pull tabs, number 25 was a $2ooo platinum diamond ring.
That is awesome! Hard work along with determination pays off!
 

You should dig the other signals too. Just because they're too deep for the pinpointer to see them, they will still not be so deep that you can't dig them easily. You never know what you might be missing unless you dig it up...
thank you I will strive to do that
 

The pinpointer is only good for a certain depth.
The detector can easily detect 2x that depth for a coin.

Your just digging modern clad. The park I believe your in certainly has good history.

I recovered silvers 6-10" from the said park.
Now for the query:
Why didn't you dig the deeper targets?
In hindsight I wish I did, and thank you for the encouragement, I must increase my Mark Manson factor, because this hobby is great and the history knowledge gain is priceless.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top