Looking for Sulfides

GoldReport

Jr. Member
Oct 6, 2024
44
58
Hello esteemed members of the board.

In my local area there are no commercial gold mines and never really have been. Through research, I came across an old State Geologist Report from the late 1800s. In it they mention that some gold was found alongside pyrite. At the time it was not of a high enough concentration that they were interested in it, but it has got me searching for this elusive deposit. I am located in the Northeast US where there is virtually no lode gold deposits to speak of. ( hardly any placer either :BangHead:)

I went out searching today to see if I could find this pyrite, I used a combination of the report I found with geologic maps to identify the units in question. The report describes the pyrite found at the contact of two distinct geologic units which only crop out in a few places that I have so far found. My first instinct is to locate places where streams have cut through this geologic contact and pan samples downstream of that. I would have done that today but underestimated how big of a drop I was facing and ran out of sunlight before I could find a good place in the stream where any material could build up. I was at the top of a series of short but steep water falls and only made it down about halfway before dusk started to set in.

The question I have for you all today: is there is a good way to locate sulfides/pyrite in the ground other than just visual examination?


The rock around here is quite mossy and full of lichen. I suppose I could take my wire brush and clean off any outcrops I suspect would be good but that seems inefficient and time consuming. While hiking today I saw samples on the ground with good iron staining (in a shale rock which doesn't seem quite normal to me) but seeing iron staining around here doesn't make me feel any better as there is considerable magnetite all over, I live within 5 miles of a handful of old workings.

Any tips?

I plan to keep searching but am not extremely confident for a couple reasons: around the time of this geologist report there were many scams of people finding gold so the information is unreliable at best, and if there was any decent gold to be found I think someone would have already done so given the lack of other gold deposits. I don't have a metal detector and it's not in the budget to buy one at the moment.

Will update as the hunt continues...
Thanks!
 

Upvote 1
If you don't find any free gold what do you do? Just roast your crushed material for a couple hours? I imagine I will be in the same boat
If they have any sulfides, I’ve been keeping them in a jar until I am motivated enough to learn to smelt.
I have no real experience with hard rock stuff. I just enjoy a good excuse to climb up mountains and bring home rocks 🤓
 

around the time of this geologist report there were many scams of people finding gold so the information is unreliable at best, and if there was any decent gold to be found I think someone would have already done so given the lack of other gold deposits.
I saw a very similar trend around here (Washington state) where the report from the 1800’s were boasting of insane values. But then you find the more recent reports and read the vein actually contained about 10% of that. Plus the fact that no one else reopened them after the Revoked Order L-208 that banned gold mining.

But aren’t those old reports so fascinating to read? I get so excited when I find a new one to read
 

I saw a very similar trend around here (Washington state) where the report from the 1800’s were boasting of insane values. But then you find the more recent reports and read the vein actually contained about 10% of that. Plus the fact that no one else reopened them after the Revoked Order L-208 that banned gold mining.

But aren’t those old reports so fascinating to read? I get so excited when I find a new one to read
Yes I love reading the old reports and seeing what rocks people were interested in back in the day. They were certainly very thorough. Industry was much different back then, small mining operations were fairly commonplace across the region. One thing I find interesting is seeing how drastically the industrial revolution changed the landscape. Operations went from a couple hundred tons per year to tens of thousands in the span of a decade!

That and being in the mining industry is what got me interested in prospecting in the first place!
 

Yes I love reading the old reports and seeing what rocks people were interested in back in the day. They were certainly very thorough. Industry was much different back then, small mining operations were fairly commonplace across the region. One thing I find interesting is seeing how drastically the industrial revolution changed the landscape. Operations went from a couple hundred tons per year to tens of thousands in the span of a decade!

That and being in the mining industry is what got me interested in prospecting in the first place!
right? Went from making tunnels to making craters. The old stuff seemed like more of an art.

If you don’t mind me asking, what do you do in the industry?
 

right? Went from making tunnels to making craters. The old stuff seemed like more of an art.

If you don’t mind me asking, what do you do in the industry?
Former quarry manager, currently a mining engineer/project manager for an aggregates company. Not the most exciting side of the industry but at the end of the day mining is just moving dirt and rock!
 

Do you have some photos of the conglomerate formation that is next to bedrock?
Here's a couple pics at different points in the formation. Finding an outcrop at the actual contact has been challenging.

This is the underlying shale:
20241116_113318.jpg


This is what the conglomerate looks like:
20241013_140317.jpg


The conglomerate has lots of exposures since its quite erosionally resistant and forms a long ridge line. The base of it is quite hard to locate directly.
 

Last edited:
Here's a couple pics at different points in the formation. Finding an outcrop at the actual contact has been challenging.

This is the underlying shale:
View attachment 2180323

This is what the conglomerate looks like:
View attachment 2180324

The conglomerate has lots of exposures since its quite erosionally resistant and forms a long ridge line. The base of it is quite hard to locate directly.
It will be quite a job to find either color or pyrites from what I see in the photos. Your idea of checking the near by streams for pyrites and colors may have a better outcome.
 

Top Member Reactions

Users who are viewing this thread

Back
Top