How Should I Clean This Silver Coin Ring?

cambria09

Bronze Member
Jun 10, 2012
1,838
3,840
Florida
Detector(s) used
Mine Lab Sovereign Elite, Mine Lab Etrac, Garrett ATMax
Primary Interest:
All Treasure Hunting

Attachments

  • 11 TV14 010314 Silvr Ring Face.jpg
    11 TV14 010314 Silvr Ring Face.jpg
    372.1 KB · Views: 204
  • 8 TV14 010314 Silvr Ring.jpg
    8 TV14 010314 Silvr Ring.jpg
    272.6 KB · Views: 209
  • 10 TV14 010314 Silvr Ring Sd2.jpg
    10 TV14 010314 Silvr Ring Sd2.jpg
    229.5 KB · Views: 189
  • 9 TV14 010314 Silvr Ring Sd1.jpg
    9 TV14 010314 Silvr Ring Sd1.jpg
    301.1 KB · Views: 193
Try cigarette ash, it's a bit dirty to work with but, I used to help my gram polish here silver with the ashes from my grandads cigarettes, it's really good lol and use a microfibre cloth after to clean it off.

Hope it helps?
 

Drop it in lemon juice, then use toothpaste.

SS
 

Take it to a jewler
 

I would think that lemon juice would have too much acid in it and the toothpaste would be to rough.
 

1. Line a dish (glass or tupperware) with a sheet of aluminum foil. 2. Sprinkle baking soda on the aluminum foil3. Place silver on the aluminum foil (make sure it is in contact with the foil)4. Boil some water5. Once water is brought to a boil, pour it gently into the dish, pouring over the entire surface area of the dish, with enough water so that the silver piece is completely submerged6. Let it sit for 10-15 minutes7. Remove the piece from the dish and rinse to remove any residue from the baking sodaDepending on how tarnished your piece is, you may need to repeat the process.

(assuming the piece is silver- it looks copper or rose gold in the pics! good luck


 

A similar technique to Mr T would be instead of using baking soda, use draino. It has to be the draino that has the magnesium flakes. Use cold water, not boiling. take the aluminum foil place the ring and 2 tablespoons of draino, wrap the foil up. Place in glass jar (outside) and fill with water. When reaction dies down, check the ring.

WARNING: I am not certain the effect this will have on whatever the gemstone may be. Perhaps the jewellers advice is the best way to begin.
 

Top Member Reactions

Users who are viewing this thread

Back
Top