Home made highbanker

[dpdkld]

Used TEEDEE sluice...84.00
Jobe sluice leggs/headerbox...100.00
California SluiceBox A52 Highbanker grizzly...52.00

Home made highbanker...priceless

Ive got an attwood 2000 GPH 12V pump to power it, and with the powersluice header box I can add another pump if needed.
I used deep V groove matting with 3/4" raised expanded aluminum sheet on top. Ive also got miners moss and carpet to mix/match depending on what Im after. I'll use a 1/4" punch plate for a grizzly to the hopper for that fine Missouri glacial gold I got here and then just add a 1/2" expanded if I go somewhere there might be larger gold. Thanks for looking and any suggestions would be appreciated. Pat

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[strickman]

looks decent ,should work well. good luck with it .

 

[Doug Watson]

The best way to come up with good sugestions is go shovel. You'll find your likes and dislikes really quick. Looks nice though. Have fun and keep us posted. Doug.

 

[jog]

At the price of highbankers now days you can't beat the price. Looks good.

 

[Goldwasher]

what kind of battery are you using or going too be using? I just ordered two 1100 gph pumps? i need a battery i can pack in.

 

[russau]

looks like itll do the job dpdkid! now go get some gold after the snow melts! we got another 2 inchs last night.

 

[Jim12f]

nice job

 

[dpdkld]

I'm gonna use a marine deep cycle and should get several hours out of it. I need a different pump as the one I got is only 3.6 amp instead of 7.6 or higher//you dont get enough head to go from stream to hopper so Im workin on it...thanks for the posts guys!