Help me identify this pump

[Vance in AK]

I know it's a keene, but wondering what model and what dredge it's appropriate for. Just picked it up used

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[AU Seeker]

I know it's a keene, but wondering what model and what dredge it's appropriate for. Just picked it up used

It's an older P160, use on 2 1/2" dredges, now they called them PHP160

200 GPM Direct Mount Pump: Keene Engineering Online

SEO: META DESCRIPTION

www.keene.store

2.5" - 4 HP Ultra Dredge with Compressor & Power Jet: Keene Engineering Online

SEO: META DESCRIPTION

www.keene.store

 

[Vance in AK]

It's an older P160, use on 2 1/2" dredges, now they called them PHP160

200 GPM Direct Mount Pump: Keene Engineering Online

SEO: META DESCRIPTION

www.keene.store

2.5" - 4 HP Ultra Dredge with Compressor & Power Jet: Keene Engineering Online

SEO: META DESCRIPTION

www.keene.store

Thank you sir!
Curiouisly its physicaly larger than the original motor/pump (Dahlke DP-125. (No idea of GPM)) that came on my Dahlke 4b micro dredge. Same inlet & outlet sizes, but bigger body. The later Dahlkes came with a Dahlke DP-150 so I assume the 125 was undersize. The Dahlke is a someday dredge I bought with no hose or jet for a someday project so I have never run it.

 

[russau]

To see what the approximant GPM of your pump try getting a 55 gallon barrel and fill it with water and set up your pump/eng.. to pump it out using a stop watch to see how long it takes = GPM

 

[Reed Lukens]

With a 1¼" outlet it's probably an old P100. I think it puts out around 125gpm. Could be a P90. The P200 stated above has a 1½" npt outlet...