Gold Bug II Help

Rutnbuck

Full Member
Jun 26, 2005
110
18
No. Utah
Detector(s) used
whites xlt, Goldbug2,
Posted this in the Service Section with no response. Thought I would post it here. I have a gold bug II it seems to work fine except with gold it aint much good. I and a friend went nugget shooting. He also has a GBII. I have a nugget I use for tests. After ground balance I am only able to pick the nugget up at about 2 inches. However my buddy with his gold bug II he is able to pick the nugget up at 8-10 inches. Even if he tunes both machines. What kind of problem might this be? I spent 4 days in good nugget country and never found a speck! However I found all kinds of trash.
Stumped any help would be apprciated.
Rut
 

Upvote 0
Install fresh batteries and try switching your coil with his. If you get the same poor results then it will have to be sent in to the factory.



Good luck with that,
GG~
 

Amen a switcheroo is in order as thats not right. Did you miss one of the the tuning buttons somwhere?? Tiny 7.5 inch coil ROCKS!!!!!!!!!!!!!!!!!!! John
 

If all else fails, wait for Woof to get to you. I own a GB2 and swear by it. You'll be ok. TTC
 

Top Member Reactions

Users who are viewing this thread

Back
Top