Equinox carbon-fiber rods / shafts (black AND colored), and CTX 3030 rods, IN STOCK

[sgoss66]

Hi all!

I just returned from vacation, and am in the midst of building shafts, and filling customer orders!

I have Equinox lower rods, upper shafts (and COMPLETE shafts) in stock, along with CTX 3030 lower rods -- all ready to ship. I also have counterweights for my Equinox shafts ready to custom-build for you, AND a new batch of "Herke" aluminum arm cuffs (and optional neoprene cuff covers) has just been completed, with cuffs now available with any Equinox shaft purchase.

Finally, I'm also working on a new "limited-edition" batch of COLORED carbon-fiber complete shafts for the Equinox; many are reserved for "wait-list" customers, but I'll have a few available, in several colors, shortly. Please see the latest post on my vendor page (in the "Supporting Vendors" section here on the T-Net website), for details, and available colors.

If I can be of service, with any rod/shaft needs for your Equinox or CTX 3030, please contact me, or visit my website and/or Facebook page.

THANKS!

Steve
Steve's Detector Rods, home of Equinox and CTX 3030 carbon-fiber shafts and rods
www.facebook.com/stevesdetectorrods

email: [email protected]

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[Iffy Signals]

Hell yea Steve! That cam lock works great!! Thx again.

Hi all!

I just returned from vacation, and am in the midst of building shafts, and filling customer orders!

I have Equinox lower rods, upper shafts (and COMPLETE shafts) in stock, along with CTX 3030 lower rods -- all ready to ship. I also have counterweights for my Equinox shafts ready to custom-build for you, AND a new batch of "Herke" aluminum arm cuffs (and optional neoprene cuff covers) has just been completed, with cuffs now available with any Equinox shaft purchase.

Finally, I'm also working on a new "limited-edition" batch of COLORED carbon-fiber complete shafts for the Equinox; many are reserved for "wait-list" customers, but I'll have a few available, in several colors, shortly. Please see the latest post on my vendor page (in the "Supporting Vendors" section here on the T-Net website), for details, and available colors.

If I can be of service, with any rod/shaft needs for your Equinox or CTX 3030, please contact me, or visit my website and/or Facebook page.

THANKS!

Steve
Steve's Detector Rods, home of Equinox and CTX 3030 carbon-fiber shafts and rods
www.facebook.com/stevesdetectorrods

email: [email protected]

 

[sgoss66]

SUPERB! I'm glad to hear it! Thank you again!

Steve

 

[sgoss66]

Hi all! Just a note that I have a few colored shafts left (1 silver, 1 green, 1 blue), plus a re-supply shipment of colored tubes arriving Monday. I also have a substantial re-supply of black tubes on the way. Bottom line, I have CTX lower rods, and Equinox lowers, uppers, and complete shafts (plus optional counterweights, and Herke cuffs) ready to ship!

Thanks,

Steve

 

[sgoss66]

Everyone --

I just got a re-supply of standard (black) tubes, so if you are interested in a shaft, I'd love to build one for you.

ALSO -- due to a mistake by my tube manufacturer, I have an opportunity to build several custom, 31" upper shafts -- in both colored, and black options -- for a GREAT price! If you are interested in an upper shaft that is slightly shorter than standard, but haven't been able to afford a full-price carbon-fiber setup, this may be your opportunity!

I look forward to hearing from you!

Thanks!

Steve

 

[sgoss66]

Hi alll!

I just received a new shipment of colored tubes, in a few different colors (red, red-black, blue, and silver), and so anyone interested in a colored shaft for the Equinox, now would be a great time to order!

Thanks!

Steve

 

[sgoss66]

Hi all!

Another big shipment of tubes -- both black, and colored -- arrived today. If you'd like an Equinox shaft -- in black, or blue/black, red/black, blue, red, green, silver, or pink, let me know, and I'll be happy to build you one!


Lower rods for the Equinox, and CTX 3030, are also available -- and I have plenty of counterweights in stock, also!

Thanks!

www.stevesdetectorrods.com
www.facebook.com/stevesdetectorrods

email: [email protected]
my T-Net vendor site: http://www.treasurenet.com/forums/steve-s-detector-rods/

​

 

[South Padre Treasure]

Steve,
Just curious do you make any for Excalibur II.
Trying to see what my options are for new set up. will you sell blank tube for me to make my own? Just Wondering. Thank You for any help you can provide.

 

[sgoss66]

Thanks for your interest!

I am in the process of working on two prototype shafts -- one for the Sovereign, and one for an Excal. I have all necessary parts, except a couple of specific tubes, that I expect to have in-hand within a week.

The Sovereign shaft is for a customer who plans to hip-mount his control box, so this will be an easy build. I have arm cuffs, handle assemblies, and that plastic pieces for the end of the lower rod, where the coil attaches (the "yoke" or "clevis" or "head," as some call it), and so -- with his being a hip mount, it's a pretty easy build.

With an Excal, the challenge is how -- and where -- to mount the control box. The Excal and the Sovereign use that same plastic piece for the lower rod, and so a lower rod is no problem for an Excal. And like I said, I have handles, and arm cuffs. So, it's just a matter of figuring out your control box mount. If you planned to "hip mount," that would be the easiest shaft design. The next easiest would be a design where the control box is mounted to the bottom of the shaft, under the arm cuff -- OR on top OR bottom of the shaft, beyond the arm cuff. There other options also, it would be a matter of us talking through the details to come up with a custom mounting position that works best for you. And yes, I am willing to sell you a tube/tubes, if that's the route you prefer.

If you wish to pursue/discuss further, please feel free to send me an email, to [email protected], and we can chat about the possibilities.

THANK YOU for your interest!

Steve

 

[South Padre Treasure]

Sent you a email, Thanks steve.

 

[sgoss66]

South Padre --

Got it, thanks!

Steve

 

[sgoss66]

Hi all! I just wanted to note that I have both black, and colored, Equinox shafts in stock, and ready to ship (colors include green, blue, red, silver, blue-black, and red-black, at this time). I also have plenty of counterweights available, as well as CTX 3030 lower rods. If you have any need for a rod or shaft, I'd be happy to get you set up with what you need.

THANKS!

Steve

Steve's Detector Rods, home of Equinox and CTX 3030 carbon-fiber shafts and rods
www.facebook.com/stevesdetectorrods
email -- [email protected]
T-Net vendor page -- http://www.treasurenet.com/forums/steve-s-detector-rods/

 

[smokeythecat]

A couple of my friends with an Equinox have purchased the shafts and have been very pleased with them.

 

[MetalArchSC]

I am one of them... Great shafts! And the counter balance attachment is fantastic.

 

[sgoss66]

Thank you both, for the kind words/support! Very much appreciated!

Steve

 

[sgoss66]

Hi all,

Just an update that shafts are in stock -- both black, and some colored shafts -- and ready to ship!

Work is complete on Sovereign hip-mount shafts, Excalibur hip-mount OR shaft-mount shafts, and progress is being made on the two-piece shafts for Garrett's Ace and AT-series machines...

Thanks!

Steve
Steve's Detector Rods, home of Equinox and CTX 3030 carbon-fiber shafts and rods
www.facebook.com/stevesdetectorrods

 

[sgoss66]

Hi all, shafts are in stock, and ready to ship.

ALSO -- please don't miss the Holiday Facebook shaft/rod giveaway! Please check Steve's "vendor page," here on T-Net, or Steve's Facebook page, for details...

Thanks!

Steve
Steve's Detector Rods
www.facebook.com/stevesdetectorrods

 

[Pointman]

Steve, your website doesn’t show up correctly on my iPhone. Everything is jumbled up.

 

[sgoss66]

Pointman,

SO sorry for the late reply, I didn't see this until just now.

Yes, on some phones the webpage is jumbled -- it's designed for a tablet or PC; I will see what I can do but I'm not sure what all needs to be done, to optimize it for all phones. My apologies. Again, a tablet or PC will work, until I can see if I can make some changes to help with the phones issue.

Meanwhile, if you send me an email to [email protected], I'll be happy to help you out if you like.

I'm sending you a PM as well, since I missed your post...

Thank you for your interest!

Steve

 

[sgoss66]

Hi all!

Merry Christmas from Steve's...

I have shafts and rods in stock and ready to ship, including red/black, silver, and red Equinox shafts (along with the standard black, of course), along with black CTX 3030 lower rods. If you are in need of a rod or shaft, and have some "Christmas money" to apply toward a purchase, let me know and I'll be happy to help, LOL!

As I have mentioned elsewhere, I can now offer colored CTX 3030 lower rods (on a "custom/special order" basis); I am also now able to produce custom Excal and Sovereign shafts; I am just about ready to have two-piece lower rods for Garrett's AT and ACE series machines available; finally -- carbon-fiber sand scoop handles will be coming very soon!

Thanks!

Steve, Steve's Detector Rods

www.stevesdetectorrods.com
www.facebook.com/stevesdetectorrods

email: [email protected]