D2 Full tones and iron audio

[mudwhale]

I posted this on another thread and forum about running Full Tones and getting zero Iron audio in all programs except Sensitive Full Tones. I get iron blips if I want in all the other tone modes. I'm at V.7 and running machine wide open and not a peep of Iron in full tones.

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[GreenMeanie]

Check SILENCER and B CAP reject settings.
Otherwise try to download and install the patch again.

 

[mudwhale]

The answer has been solved. Full tones only runs with an iron disc of -6.4 Now it is fine. Thanks for your reply Sir.

 

[mudwhale]

Full tones seems to use a different scale for iron. If you want hear iron you have to lower the disc all the way down. Iron disc still works as well as iron volume. You can use disc but it is at a lower number scale. The manual only states, "Lower the discrimination to hear the ferrous items and ground with low tone in proportion to their conductivity". This is vague and maybe a translation thing? The Iron sounds really start to disappear with a disc of 5. Anywho, the machine is working just fine now that I know how full tones works.