Couple more hunts at old cellar hole, large copper total at 11 for site so far

pa-dirt_nc-sand

Silver Member
Apr 18, 2016
4,256
14,907
South Western PA
🥇 Banner finds
2
🏆 Honorable Mentions:
2
Detector(s) used
ACE 250 with DD coil
Equinox 600
Primary Interest:
Metal Detecting
Hunt 7 & 8 at old cellar hole in PA park woods. This site has given up the most large coppers of any site for me at 11 coppers from KG’s up to Braided Hair’s. Digging the super iffy signals, pulling out nails are leading to lots more good targets. Very concentrated area around 10’x20’ giving up the majority of the finds, about 10’ from the cellar hole.

Anyone know what the larger copper piece is with crescent shape in the miscellaneous handful?

Super fun site! Thx
 

Attachments

  • IMG_0068.jpeg
    IMG_0068.jpeg
    1.4 MB · Views: 34
  • IMG_0069.jpeg
    IMG_0069.jpeg
    1.4 MB · Views: 29
  • IMG_0067.jpeg
    IMG_0067.jpeg
    1.5 MB · Views: 25
  • IMG_0070.jpeg
    IMG_0070.jpeg
    1.2 MB · Views: 25
  • IMG_0062.jpeg
    IMG_0062.jpeg
    2.7 MB · Views: 30
Upvote 14
You are doing great in that area. Congratulations..
Good luck with the identification of the one piece
 

Hunt 7 & 8 at old cellar hole in PA park woods. This site has given up the most large coppers of any site for me at 11 coppers from KG’s up to Braided Hair’s. Digging the super iffy signals, pulling out nails are leading to lots more good targets. Very concentrated area around 10’x20’ giving up the majority of the finds, about 10’ from the cellar hole.

Anyone know what the larger copper piece is with crescent shape in the miscellaneous handful?

Super fun site! Thx
great saves all around, wtg
 

Awesome site you've got!

The crescent pc looks like a strap went through it.
 

Good day of digging, getting a few more coppers from the site.
I would say the crescent shaped item is a strap end.
Very nice recovery
 

Anyone know what the larger copper piece is with crescent shape in the miscellaneous handful?
Lens is trying to make an axe head out of it.
Does the convex side of the crescent look/feel like it ever had an edge?

Small for an axe. If not an axe per se, some other cutting/chopping tool?
 

Top Member Reactions

Users who are viewing this thread

Back
Top