ace 250 with the YF-1 pin pointer

[X-Terra70_TreasureHunter]

Hi Everyone a newbie here

i have the Ace 250 but was wondering if any one had the Sunray YF-1 pinpointer attached to there metal detector. I was wondering how well that pinpointer works w/ the Ace 250.

TreasureHunter

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[roswellborn]

I dunno. But I'd be interested in knowing, too.

And another question - what difference is there between the pinpointers you hook up to the detector and the ones that are "only" handheld? Other than the chance of losing it, that is.

HH
Nan

 

[djabend]

I dunno. But I'd be interested in knowing, too.

And another question - what difference is there between the pinpointers you hook up to the detector and the ones that are "only" handheld? Other than the chance of losing it, that is.

HH
Nan

The difference is that these in-line detector probes act like a smaller coil that you can use with the flip of a switch. They use the program your detector is using so they can discriminate and for the most part get better depth then a handheld (I use a sunray XL-1 on my XLT and I can pinpoint a target at 3+ inches and get a VDI Number on it)
I would feel lost with out my sunray!
I am not sure of the results you would get with an Ace 250 but it would most likely be similar
HH,
Donny

 

[re-tek]

dont forget this means another cable to tangle with. so when you kneel down to dig, you'll have a headphone cable and a pinpointer cable to deal with.