4 Dandies and a Liberty Cap!

brianc053

Hero Member
Jan 27, 2015
988
3,462
Sussex County, DE
🏆 Honorable Mentions:
3
Detector(s) used
Minelab Equinox 800
XP Deus 2
Primary Interest:
Metal Detecting
Hi everyone. Today I finally could return to the field that I detected a few weeks ago (https://www.treasurenet.com/threads/back-to-detecting-after-1-year.703809/); it was unavailable due to Delaware's week-long "any gun you want" deer hunting season.
I was hopeful that the early indications of a Colonial era homesite would be true, and based on today's results I'm confident I've found that homesite.

Last time (which was the first time at the site) I detected for a while in the area of the 1900s house; today I didn't spend any time over there (the wheat pennies can wait). I spent all of my 3.5 hours today in and around the area where I found those older buttons and shoe buckle piece. (more on my approach later.)

And what a day! At regular intervals the site produced a total of 11 buttons:
  • four (4) dandies, including a tombac one with shank and two with fancy hand-etchings
  • a complete "puffback" button with shank
  • a beautiful gold gilt button from the 1820-1850 range based on this post (https://www.treasurenet.com/threads...a-fraction-too-buckle-and-watch-cover.534611/). My button has the same exact number "9429" along with Hammond Turner & Sons.
  • two other English buttons (based on "Treble gilt super fine quality" type back marks) and two small cuff buttons.
But in the last hole of the day I finally found a coin - and what a coin!
It's pretty slick, but there's a wreath on the back and a right-facing bust on the front. I posted it on ID.me (Facebook group) and the experts there agreed: I've found myself a Liberty Cap Large Cent! I'll never know the year, but - who cares! It's either 1794 or 1795, and that's good enough for me! (Comments with the last 3 pictures on what is visible on the coin.)

As for the approach I took today: I was very systematic about it. I brought four wooden skewers (the kind you use for kabobs) with red tape on them, and I started by marking the edges of where I could hear the iron grunts of what I think is the home site. And then I lawn-mowered the place (not literally): I walked back and forth along roughly 75-100 yard tracks. In 3.5 hours I covered maybe 1/3 to 1/2 of the "homesite" I think, so there's still a lot to go. And then I'll turn 90 degrees and do it all again. And then I'll change settings on my Deus 2 and do it again.
I suspect I'll be working this field until the plant in the spring - and that's totally fine with me! I can't wait to get back!

- Brian

IMG_5483.jpg



In the image below you can see the wreath just above my thumb nail:
IMG_5480.jpg


In this very green image you can barely see the bust facing right, and if you use your imagination you can see the cap on the left:
IMG_5482.jpg


The dimensions match a Liberty Cap Large Cent (29mm, but after almost 250 years you can excuse the coin for losing half a millimeter):
IMG_5481.jpg
 

Last edited:
Upvote 17
Hi everyone. Today I finally could return to the field that I detected a few weeks ago (https://www.treasurenet.com/threads/back-to-detecting-after-1-year.703809/); it was unavailable due to Delaware's week-long "any gun you want" deer hunting season.
I was hopeful that the early indications of a Colonial era homesite would be true, and based on today's results I'm confident I've found that homesite.

Last time (which was the first time at the site) I detected for a while in the area of the 1900s house; today I didn't spend any time over there (the wheat pennies can wait). I spent all of my 3.5 hours today in and around the area where I found those older buttons and shoe buckle piece. (more on my approach later.)

And what a day! At regular intervals the site produced a total of 11 buttons:
  • four (4) dandies, including a tombac one with shank and two with fancy hand-etchings
  • a complete "puffback" button with shank
  • a beautiful gold gilt button from the 1820-1850 range based on this post (https://www.treasurenet.com/threads...a-fraction-too-buckle-and-watch-cover.534611/). My button has the same exact number "9429" along with Hammond Turner & Sons.
  • two other English buttons (based on "Treble gilt super fine quality" type back marks) and two small cuff buttons.
But in the last hole of the day I finally found a coin - and what a coin!
It's pretty slick, but there's a wreath on the back and a right-facing bust on the front. I posted it on ID.me (Facebook group) and the experts there agreed: I've found myself a Liberty Cap Large Cent! I'll never know the year, but - who cares! It's either 1794 or 1795, and that's good enough for me! (Comments with the last 3 pictures on what is visible on the coin.)

As for the approach I took today: I was very systematic about it. I brought four wooden skewers (the kind you use for kabobs) with red tape on them, and I started by marking the edges of where I could hear the iron grunts of what I think is the home site. And then I lawn-mowered the place (not literally): I walked back and forth along roughly 75-100 yard tracks. In 3.5 hours I covered maybe 1/3 to 1/2 of the "homesite" I think, so there's still a lot to go. And then I'll turn 90 degrees and do it all again. And then I'll change settings on my Deus 2 and do it again.
I suspect I'll be working this field until the plant in the spring - and that's totally fine with me! I can't wait to get back!

- Brian

View attachment 2180951


In the image below you can see the wreath just above my thumb nail:
View attachment 2180952

In this very green image you can barely see the bust facing right, and if you use your imagination you can see the cap on the left:
View attachment 2180953

The dimensions match a Liberty Cap Large Cent (29mm, but after almost 250 years you can excuse the coin for losing half a millimeter):
View attachment 2180954
great saves all around, thanks and Happy Thanksgiving
 

That was time well spent at the site.
Liking the buttons 👌
Congratulations on the LC, certainly an oldie.
Best of luck on the return hunts.

May a better copper example show up, and possibly a silver to Cap the year off.
 

Great job, pound that place hard and you'll be rewarded with more coins.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top