Scratch / Acid testing question..

CoinandRelicMan

Silver Member
Apr 3, 2011
3,979
2,244
๐Ÿ† Honorable Mentions:
3
Detector(s) used
E-Trac, Safari, Cortes, Musketeer, Makro Pin-Pointer
Primary Interest:
Metal Detecting
Last edited:
did you test it for 10k? I have a couple of fake 14k gold jewelry items, makes you sick but the acid test keeps you from finding out elsewhere. but you did prove the rest was good, those kits are really worth it.
 

did you test it for 10k? I have a couple of fake 14k gold jewelry items, makes you sick but the acid test keeps you from finding out elsewhere. but you did prove the rest was good, those kits are really worth it.

Hi dirtlooter, yeah I wrote 10K pass , above. My problem is that I don't know what passing for the platinum acid and silver acid, and 10k gold acid test means ! In all three cases the material from the ring on the ceramic stayed.
 

Judging by the design possible silver or Stainless steel, which SS will pass the plat, gold n silver acids... and can be rather heavy. If it is silver the 18k acid will turn it blue in color as it dissolves, and some SS is magnetic also. My guess would be sterling or silver. Test it with the 18k...

And Plat it would be heavy as a lead sinker...
 

sorry didn't read it completely I guess, saw the three ring. OBN gave you a good answer
 

Platinum is almost twice as heavy as lead or silver (both lead and silver have about the same specific gravity with lead being slightly heavier), platinum is just a little heavier than gold.
 

Last edited:
Judging by the design possible silver or Stainless steel, which SS will pass the plat, gold n silver acids... and can be rather heavy. If it is silver the 18k acid will turn it blue in color as it dissolves, and some SS is magnetic also. My guess would be sterling or silver. Test it with the 18k...

And Plat it would be heavy as a lead sinker...

Hi OBM thanks for your reply =)
FLE ring weight.jpg
18K acid test did seem to give the line a blue like look. It is non-magnetic, reads very high on my E-Track 45 to 47 conductive.
Would silver pass on the platinum test typically?

Sounds like it is a silver ring then if silver passes the platinum acid test commonly.

Just tested another sterling ring with the platinum acid and got same result.

Pretty sure the ring is silver now =)
 

Last edited:
the 18k acid turning it blue is pretty difinitive imo.most jewelers use it over the silver solution.
 

Glad you figured that one out...A nice heavy Silver ring!! Congrads....and sorry for the delay in getting back, been bizzy treasure hunting and forgot where this post was.....
 

Thanks for the good information !!
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top