Fancy Hessian Tombak button?!

VTSwinger

Jr. Member
May 5, 2017
90
354
Northern VT
Detector(s) used
Garrett AT PRO
XP DEUS 2
Primary Interest:
Metal Detecting

Attachments

  • PXL_20231105_010030461.jpg
    PXL_20231105_010030461.jpg
    850 KB · Views: 77
  • PXL_20231105_010019429.jpg
    PXL_20231105_010019429.jpg
    912.2 KB · Views: 51
Upvote 9
Nice dig. It's a fancy tombac. Breaks just like a tombac too. What would make it Hessian? Something in the design?
 

Nice dig. It's a fancy tombac. Breaks just like a tombac too. What would make it Hessian? Something in the design?
I assumed the shank of a different materiel going into the cone on the back was the tell tale sign but I'm genuinely asking. I have several other confirmed hessian buttons from this site but nothing this big or fancy.
 

Pulled this from a hunted to death site, don't know how I missed it before but happy to have it. Am I right in how I'm describing this?
Nice!!! Congrats!!!
 

I assumed the shank of a different materiel going into the cone on the back was the tell tale sign but I'm genuinely asking. I have several other confirmed hessian buttons from this site but nothing this big or fancy.
Nothing to do with Hessian. That reverse shank type is common in the UK manufacturing process. I have tons, its just a civvy tombac button with a common decor.
 

Nothing to do with Hessian. That reverse shank type is common in the UK manufacturing process. I have tons, its just a civvy tombac button with a common decor.
Thank you. Is the manufacturing style any different for a Hessian button or is it just the application of it being a military button that makes it so?
 

You did good :) what machine were you using VTSwinger ?
 

You did good :) what machine were you using VTSwinger ?
Deus 2. I've used the at pro as this sight for a few years and have another 2 on it with the deus 2. I went back to my AT pro to use the mini coil on an iron patch and didn't get any nonferrous. Switched over to the deus, sensitive full tones and found this within 3 swings. Dumb luck combined with pulling iron out of this sight for years.
 

I have seen a lot of detectorists swinging there coils. I bet 80% of them are moving when they swing while walking
 

Thank you. Is the manufacturing style any different for a Hessian button or is it just the application of it being a military button that makes it so?
Many of the Hessian attributions are questionable in the first place, as there are no differences between the Countries or the Military types.
 

Many of the Hessian attributions are questionable in the first place, as there are no differences between the Countries or the Military types.
I was actually suspicious of this, thanks for confirming.
 

Deus 2. I've used the at pro as this sight for a few years and have another 2 on it with the deus 2. I went back to my AT pro to use the mini coil on an iron patch and didn't get any nonferrous. Switched over to the deus, sensitive full tones and found this within 3 swings. Dumb luck combined with pulling iron out of this sight for years.
 

Thank you for taking time to reply :)
 

Top Member Reactions

Users who are viewing this thread

Back
Top