Wood splitting wedge

Dontforgetme

Jr. Member
Joined
Jun 8, 2020
Messages
28
Reaction score
112
Golden Thread
0
Location
N.H.
Detector(s) used
minelab equinox 600
garrett ace 200
Primary Interest:
Metal Detecting
Granite or wood splitting wedge? N.H.

Hi, I found these searching a site with my dad. It dates to 1800 and there are older celler holes above that date into the 1700s. I think they are granite or wood splitting wedges but not sure. They are about 5 inches long except the short one which is about 4. Can anyone date these? They do have red paint on them which is throwing me off. Thanks! -Mike-
20200614_154246.webp20200614_154257.webp
 

Last edited:
not like any wedge I've ever seen . not very old with the red paint . no more than 40 years old in my opinion
they were a stake for something , maybe for concrete forms .
images
 

Upvote 0
Look like leaf springs off an old vehicle. I find pieces of model A or model T cars leaf springs around old farm sites.

The one on the right looks curved. Anything curved like that is difficult to use as a wedge with a hammer.
 

Upvote 0
Thank you for your help!
 

Upvote 0
I’ve found some like these at a place where they got big slabs of rock.
 

Upvote 0
As NVnutcase mentioned about rock slabs. I have seen where they drill a series of holes across a large slab of rock and then take this style of wedge and drive them in the holes to cause the rock to break off into a large slab. This was also the type of wedge used in road construction to cut a right away thru stone using the same process. http://www.stonestructures.org/html/quarry_tools.html
 

Last edited:
Upvote 0
I dont think they are wood splitting wedges anymore, possibly for splitting rock. Thanks for all the insight
 

Upvote 0
could be a stone wedge/chisel , I agree, not to old "red paint, and they dont looked forged".
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom