What is this?? Please help!

SCDigginWithAK

Bronze Member
Mar 31, 2012
1,489
357
South Carolina
Detector(s) used
Garrett AT Pro, Garrett Ace 350, Garrett Pro Pointer, Fisher F2
Primary Interest:
Metal Detecting
What is this?

image-3313283482.jpg



image-2628355233.jpg



image-959044598.jpg



image-836275753.jpg



image-630450947.jpg
 

Maybe a small clock pendulum that has been bent over? It's a little hard to tell from the photo....is the hole in the narrow section or wide section?
 

Upvote 0
Maybe a small clock pendulum that has been bent over? It's a little hard to tell from the photo....is the hole in the narrow section or wide section?

I don't think it's bent I think that's how it was made
 

Upvote 0
Cleaned dirt off and out. Not bent. It was made to go through the top. I have no clue.

image-421499475.jpg



image-2565603685.jpg



image-3407772426.jpg



image-3617331782.jpg
 

Upvote 0
I thought about those but why would it have the hole thingy? If it wasnt for the hole I'd say tie clip or hair piece or even the money clip. This one is very odd
 

Upvote 0
Possibly a belt slide for a watch chain.

Similar below:

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=855352"/>

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=855353"/>

Hmmmm I can see that!
 

Upvote 0
Possibly a belt slide for a watch chain.

Similar below:

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=855352"/>

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=855353"/>

After looking I think you may be right! Anyone agree or disagree?
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top