cellerfeller
Full Member
- Joined
- May 15, 2019
- Messages
- 105
- Reaction score
- 201
- Golden Thread
- 0
- Location
- Nova Scotia
- Detector(s) used
- Garrett Ace 400i
- Primary Interest:
- All Treasure Hunting
I got this drawknife at a country auction years ago and have always wondered if it was used by a carriage maker and if so what for. It looks like it would make a deep dado.
The knife measures 17" from the center of one handle to the other. It looks to be hand forged and the cutting blade is 3/8" wide with a depth of cut of 1 3/4" and is made to adjust in and out of the frame. I have seen a lot of drawknives but never one like this so any help in identifying it would be appreciated.
The knife measures 17" from the center of one handle to the other. It looks to be hand forged and the cutting blade is 3/8" wide with a depth of cut of 1 3/4" and is made to adjust in and out of the frame. I have seen a lot of drawknives but never one like this so any help in identifying it would be appreciated.
