Underground Dog FENCING Wires

[Gare]

Any Deus 2 users have these issues ? What do you do if there is underground fencing ?

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[SD51]

Unplug the power supply.

 

[Gare]

Unplug the power supply.

But sometimes this is not possible . Just wondering if anyone else has and hints

 

[Carl-NC]

Both a regular electric fence and an underground "invisible" fence work just like a huge pulse induction metal detector, and if you've ever hunted near someone with a PI detector you'll know there isn't much you can do but get away from them. You can try adjusting the frequency shift to see if there is a quiet channel. But the problem is that the electric pulse sent out on the fence wire is strong enough to briefly overload the detector if you are close enough, no matter what frequency channel you use. So the best thing to try is to get close enough to the wire to just pick it up, then do a frequency scan. After that, you can still only get so close to the wire.

 

[Gare]

Both a regular electric fence and an underground "invisible" fence work just like a huge pulse induction metal detector, and if you've ever hunted near someone with a PI detector you'll know there isn't much you can do but get away from them. You can try adjusting the frequency shift to see if there is a quiet channel. But the problem is that the electric pulse sent out on the fence wire is strong enough to briefly overload the detector if you are close enough, no matter what frequency channel you use. So the best thing to try is to get close enough to the wire to just pick it up, then do a frequency scan. After that, you can still only get so close to the wire.

Carl This i think is what can be done NOT MUCH Thank you EVER SO MUCH for your explanation

 

[sibbley]

Any Deus 2 users have these issues ? What do you do if there is underground fencing ?

Yeah, I have these issues. Both neighbors have dog fences here at home. I use the Mono program and just pick the quietest frequency.

 

[ConceptualizedNetherlandr]

Take the collar off, you will be much more comfortable

 

[Chilli]

Both a regular electric fence and an underground "invisible" fence work just like a huge pulse induction metal detector, and if you've ever hunted near someone with a PI detector you'll know there isn't much you can do but get away from them. You can try adjusting the frequency shift to see if there is a quiet channel. But the problem is that the electric pulse sent out on the fence wire is strong enough to briefly overload the detector if you are close enough, no matter what frequency channel you use. So the best thing to try is to get close enough to the wire to just pick it up, then do a frequency scan. After that, you can still only get so close to the wire.

Hi yeah we have the same issue with Roo fences. Within a couple hundred meters pinging on the pulse overriding signals. Can never scan it out.

 

[Gare]

I did not think much could be done but was just hoping some one else had some hints.

 

[sibbley]

I did not think much could be done but was just hoping some one else had some hints.

Gary Blackwell has come out with a Tekkna program based on Deus Mono. Works pretty good in my yard surrounded by dog fences.

 

[Gare]

Have you tried this Sibbley on the underground fencing ?

 

[sibbley]

Have you tried this Sibbley on the underground fencing ?

Yeah, works pretty good here at home. It's worth a try.

 

[Gare]

Thank you Mr SibbleyI will give a report when I can get back out again