oregonmp03
Full Member
So I've got an idea in my head that I'll probably start on this weekend but I had some questions for people who've built trommels in the past. I'm wanting to build a small portable trommel that would sit over a sluice that was in the water. I'm in Oregon and I'm trying to bypass the issues that have come up with pumps and dredges, highbanking, and motorized equipment etc, avoiding a whole series of issues with rules and permits. Sluicing is legal still, thankfully, can be done year around and doesn't require a permit as long as the sluice isn't connected to the trommel all the trommel ends up being is a rotating screen and wash station.
So what I'm thinking is a hand cranked trommel, that can be placed over a sluice, with an attached hang crank water pump working off the same crank to wash rocks, rather than shoveling into a screen, screening into a bucket, moving the bucket to the sluice, feeding material into the sluice, then moving back to the digging area. Just dump, crank one handle, water pumps up and the trommel turns, gold....
My questions are:
-What kind of sprocket and rollers do you use for your trommel?
-Has anyone used a rotating hand crank water pump before? If so does anyone have a suggestion for the pump to make sure I haven enough rock washing water?
-Typically what is the downward angle of the trommel to sufficiently put discarded material out the end?
-Any ideas or thoughts would be appreciated
I'll post more as I get it and I'll for sure post the build when it's in progress
So what I'm thinking is a hand cranked trommel, that can be placed over a sluice, with an attached hang crank water pump working off the same crank to wash rocks, rather than shoveling into a screen, screening into a bucket, moving the bucket to the sluice, feeding material into the sluice, then moving back to the digging area. Just dump, crank one handle, water pumps up and the trommel turns, gold....
My questions are:
-What kind of sprocket and rollers do you use for your trommel?
-Has anyone used a rotating hand crank water pump before? If so does anyone have a suggestion for the pump to make sure I haven enough rock washing water?
-Typically what is the downward angle of the trommel to sufficiently put discarded material out the end?
-Any ideas or thoughts would be appreciated
I'll post more as I get it and I'll for sure post the build when it's in progress