taking apart tires

[whitesid]

does anyone know how you can get the tire off of their steel or aluminum rims?

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[aa battery]

it depends on if you have any power tools. I cant stand doing that its hard work.

 

[snake35]

Use a sawzall, They come off in about two minutes. Good luck.

 

[sniffer]

or try a circular saw with carbide blade

 

[droop1076]

The guys at the tire store make it look easy using only two crow bars. Maybe it would be just as easy to give the tire guy a few bucks to take it off.

 

[snake35]

Paying someone to do it, would eat the profit on steel rims.

 

[jeff of pa]

Take the Valve stem Guts Out.
When completly empty
have somone Drive over the tire Getting as close to the rim as possable.
Turn tire Slightly, Do it again. keep turning & Driving over it.
This may take 5- 10 Minutes
But I used to do it all the time.
Mostly just one side though to
put Innertubes in tires that wouldn't hold air on their own

Once the Tire is Broken from the Rim
turn it over & do the other side.
The 2nd. side should go easy.

Now that it is loose inside, Take 2 Crow Bars or Heavy long screwdrivers &
Pry it off.


Recently I removed one with a Hacksaw but.
I don't know if you want the tires.

 

[aa battery]

Take the Valve stem Guts Out.
When completly empty
have somone Drive over the tire Getting as close to the rim as possable.
Turn tire Slightly, Do it again. keep turning & Driving over it.
This may take 5- 10 Minutes
But I used to do it all the time.
Mostly just one side though to
put Innertubes in tires that wouldn't hold air on their own

Once the Tire is Broken from the Rim
turn it over & do the other side.
The 2nd. side should go easy.

Now that it is loose inside, Take 2 Crow Bars or Heavy long screwdrivers &
Pry it off.


Recently I removed one with a Hacksaw but.
I don't know if you want the tires.

Thanks Jeff we have some split rims and you know how dangerous they are...aa