materdigger1
Sr. Member
- Joined
- Jun 7, 2012
- Messages
- 369
- Reaction score
- 143
- Golden Thread
- 0
- Location
- Natchez, Mississippi
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Minelab CTX-3030, Teknetics T2SE , Bounty Hunter Pioneer 202, Garrett Pro Pointer, Predator Raven 25 digging tool
- Primary Interest:
- All Treasure Hunting
Definitely need help on these 2 lead pieces - 1st one has a mushroom shaped head - overall length is 1-7/8" - round area just below the mushroom head is 9/16" dia and slightly bent when I found it (hit it with my shovel and cut it but it was already bent) - It has 5 distinct holes equally spaced just below the mushroom head as though may have had spokes of some kind - one of the holes still has a piece of metal slightly protruding from it. It is also hollow inside all the way up to the mushroom head. Found right in with some C/W bullets and other C/W relics.




2nd piece has a round head that was hand whittled then is square or retangular shaped for rest of length - overall length is 5" - the round head is 1/2" long and 9/16" dia and has an indention in end much like the bottom of a bullet - the shaft area starts out at 1/2" x 1/2" and gradually tapers to 3/8" x 5/32 - the arc or curved shape appears to be made that way - I have a metal detecting friend who found one in same area just like mine except his does not have the rounded area on the end - his is square for entire length - as with the item above this also was found right in with C/W bullets and C/W relics in an area where we have found a good concentration of C/W stuff



Any help from my fellow treasure netters is greatly appreciated - Thanks




2nd piece has a round head that was hand whittled then is square or retangular shaped for rest of length - overall length is 5" - the round head is 1/2" long and 9/16" dia and has an indention in end much like the bottom of a bullet - the shaft area starts out at 1/2" x 1/2" and gradually tapers to 3/8" x 5/32 - the arc or curved shape appears to be made that way - I have a metal detecting friend who found one in same area just like mine except his does not have the rounded area on the end - his is square for entire length - as with the item above this also was found right in with C/W bullets and C/W relics in an area where we have found a good concentration of C/W stuff



Any help from my fellow treasure netters is greatly appreciated - Thanks
Last edited: