Short video I did adjusting silencer

[tnsharpshooter]

https://m.youtube.com/watch?v=AIcZULsgdl0

 

Amazon Forum Fav 👍

Cry Of The Eagle: History And Legends Of The Cherokee Indians And Their Buried Treasure - Grab it through Amazon!

[dirtlooter]

definitely something to remember and consider. thanks for the video

 

[Professor of Engineering]

Thank you for sharing!

 

[gene the machine]

amazing difference between -1 and 0. up til now i've been using 0 thinking zero might help a little in rejecting some ground mineralization but i will be going to zero sikencer from now on. Thanks Tn

 

[tnsharpshooter]

amazing difference between -1 and 0. up til now i've been using 0 thinking zero might help a little in rejecting some ground mineralization but i will be going to zero sikencer from now on. Thanks Tn

If using LF coil, keeping ground sensitivty setting at 6 will help with some signals. This GS setting is under expert tab of ground balance. For whatever reason I have not seen this setting so then same thing to signals when using either the elliptical Hf coil or the 9”round Hf coil. I have very little experience with x35 coil. Did use one for a little while and sent back to owner.

Level 6 ground sensitivty setting is default setting. One problem is your ground using GS level 6 may not track using auto tracking. Hence a person may be lured to up the GS setting somewhat to make Deus track. Big mistake. Instead keep GS at 6, do pumping GB and run manual GB instead of tracking.

Xp didn’t get the Deus with LF coils just right here in this dept, with version 4.

 

[sleepyjim]

TN I am going deff or I have been outta the south to long I could not for the life of me hear some of those settings, so correct me here where needed....LOL
You was in Hot (#9) program and you set the disc to 6 and in 2 tones? Was Reactivity 3 and sil-1, that was the optimal settings in the video?

Man I need a miracle ear or new sound card or brail.....

Thanks for the video, I will have to play with this a bit...


Jim

 

[Terry Soloman]

Another great video!

 

[tnsharpshooter]

TN I am going deff or I have been outta the south to long I could not for the life of me hear some of those settings, so correct me here where needed....LOL
You was in Hot (#9) program and you set the disc to 6 and in 2 tones? Was Reactivity 3 and sil-1, that was the optimal settings in the video?

Man I need a miracle ear or new sound card or brail.....

Thanks for the video, I will have to play with this a bit...


Jim

Sounds right.
I’ll try and slow down talking just a bit next time.

 

[tnsharpshooter]

Next video coming soon.
I will talk and show how notching upper region say 97-99 can affect.
Also will look at ground notch.
Both will be explored over deeper clad dime using 9”LF coil.

The next video is ground sensitivty setting and ground balance in general including tracking.

My soil is not as gentle as Gary's In UK, so some of his videos may not be helping folks as much where soil is more harsh.

 

[tnsharpshooter]

Actually next video coming will be talking about adjusting reactivity setting (and silencer) using version 5.2 using wireless headphone module.
Will be a while currently uploading video.

Folks who don’t have remote who use version 5.2 will find helpful I think.