Sandshark?

[beachboy]

My sandshark keeps falsing, and it is really bothering me...Everytime I swing it.... it falses...I do not know if it is a grounding issue..I know that it will false when my phone rings, It is not that...I disconnected the cord from the main box and It does not false, but when I hook it up, It falses...Usually I can adjust the balance and things get better...I have been using It in the cold,,,can the insides be damage form the extreme cold...need some help...

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[Old Tom]

Just to eliminate a possible problem. Did you try another set of headphones and see if that is the problem.

 

[PhilMont]

If you have a coil cover see if there is any sand between the coil and cover. This may cause it to false.

 

[fathead]

Is your cord wrapped tightly? Are you wearing different footgear (steel toe)? I know when my swing starts to pendulum a little, my machine will false. I also have trouble if I am actually skimming the sand. I have a lower end machine so I have trouble in salt sand.

FH

 

[Sandman]

If you have a coil cover see if there is any sand between the coil and cover. This may cause it to false.

This was my first thought too. We usually forget the obvious. Also your cell phone may be the cause too. http://detectorstuff.com/2009/08/05...ay-by-first-texas-lead-engineer-dave-johnson/

Good Luck,
Sandman

 

[beachboy]

Thanks for the tips....I'll factor these in while I am out next time...

 

[firstbiggestmost]

My sandshark keeps falsing, and it is really bothering me...Everytime I swing it.... it falses...I do not know if it is a grounding issue..I know that it will false when my phone rings, It is not that...I disconnected the cord from the main box and It does not false, but when I hook it up, It falses...Usually I can adjust the balance and things get better...I have been using It in the cold,,,can the insides be damage form the extreme cold...need some help...

If this is something that just started happening, and tightening connections, new batteries, ect. doesn't help. It might be time for a trip to Prescott, AZ. HH.

http://www.tesoro.com/service/repair/

 

[beachboy]

My sandshark keeps falsing, and it is really bothering me...Everytime I swing it.... it falses...I do not know if it is a grounding issue..I know that it will false when my phone rings, It is not that...I disconnected the cord from the main box and It does not false, but when I hook it up, It falses...Usually I can adjust the balance and things get better...I have been using It in the cold,,,can the insides be damage form the extreme cold...need some help...

If this is something that just started happening, and tightening connections, new batteries, ect. doesn't help. It might be time for a trip to Prescott, AZ. HH.
I hope not, I think It might be my cord....It is not really tight, and the detector does not false as much in all metal mode. It is when it is in the factor mode...will see this weekend. The falsing got me so mad I almost threw my detector. I use to golf, but I got so fustrated I broke my clubs on the golf course. People must have thought I was crazy. The clubs were free. I had to pay for the SandShark, and it cost me 550, so I will not be throwing it, Unless it start that beeping again..
http://www.tesoro.com/service/repair/

 

[firstbiggestmost]

My sandshark keeps falsing, and it is really bothering me...Everytime I swing it.... it falses...I do not know if it is a grounding issue..I know that it will false when my phone rings, It is not that...I disconnected the cord from the main box and It does not false, but when I hook it up, It falses...Usually I can adjust the balance and things get better...I have been using It in the cold,,,can the insides be damage form the extreme cold...need some help...

If this is something that just started happening, and tightening connections, new batteries, ect. doesn't help. It might be time for a trip to Prescott, AZ. HH.
I hope not, I think It might be my cord....It is not really tight, and the detector does not false as much in all metal mode. It is when it is in the factor mode...will see this weekend. The falsing got me so mad I almost threw my detector. I use to golf, but I got so fustrated I broke my clubs on the golf course. People must have thought I was crazy. The clubs were free. I had to pay for the SandShark, and it cost me 550, so I will not be throwing it, Unless it start that beeping again..
http://www.tesoro.com/service/repair/

Are you sure you have a Sand Shark??

 

[beachboy]

Why? The price,,,It is a sandsark

 

[beachboy]

Maybe my terminology is off, the vco mode falses more then the normal mode...Should I adjust the F set, I never use that adjustment, so maybe that is the problem.

 

[firstbiggestmost]

Maybe my terminology is off, the vco mode falses more then the normal mode...Should I adjust the F set, I never use that adjustment, so maybe that is the problem.

The "F set" is also your threshold adjustment when you are in VCO or normal mode. You should definitely be adjusting your threshold to a smooth, stable level. That might be the problem. Recheck the manual about how to tune the machine. Hope that helps.

http://www.tesoro.com/info/manuals/current/sandshark/