masterjedi
Bronze Member
- May 24, 2014
- 1,757
- 1,349
- Detector(s) used
- Minelab's CTX 3030, E-Trac & EQ800, Fisher F75LTD SE & F44, Whites MXT All PRO, Whites TRX Pointer & Shovel, Predator Tools Raptor hand digger & Ranger shovel. Grey Ghost Ultimate headphones.
- Primary Interest:
- Metal Detecting
I took my Garrett AT PRO out this morning with my NEL 15" Attack coil... I went to an old armory that I had already pulled 92 coins from (all clad) with the factory 8.5 x 11" coil... this place was built in the early 1900's? I set my sensitivity to max and listened for solid mid tones over 50... It pinged at a solid 52 -54 and looked as if I was pulling another modern nickel 
The AT said 6" so I dug the plug and in the bottom of the hole was an old rusty nail. I first thought sh^$... The I realized that this is not what was pinging 52-54... I stuck my pro=pointer into the whole and sure enough the target was still deeper in the hole. I ran my fingers over the bottom of the hole and saw roundness... 
So I pulled out my camera so I could show that this coin was not masked by the iron nail. Then before
I picked up the coin, I said to myself wouldn't this be great if it was a Buffalo? And sure enough it was it was approx 6.5" in the ground under a rusty nail. I was thrilled... Please see pics...
Gary from Oregon
The AT said 6" so I dug the plug and in the bottom of the hole was an old rusty nail. I first thought sh^$... The I realized that this is not what was pinging 52-54... I stuck my pro=pointer into the whole and sure enough the target was still deeper in the hole. I ran my fingers over the bottom of the hole and saw roundness... So I pulled out my camera so I could show that this coin was not masked by the iron nail. Then before
I picked up the coin, I said to myself wouldn't this be great if it was a Buffalo? And sure enough it was it was approx 6.5" in the ground under a rusty nail. I was thrilled... Please see pics...Gary from Oregon
Amazon Forum Fav 👍
Upvote
6
