LawrencetheMDer
Hero Member
- Feb 22, 2014
- 986
- 2,406
- 🏆 Honorable Mentions:
- 2
- Detector(s) used
- Minelab Manticore, Minelab CTX3030 w 11" and 17" DD coils,
Minelab Excalibur II w 10" coil, Equinox 800 (4) w 11" and 15" coils,
Troy Shadow x2 w 7" coil, Pointers; Garrett Carrot, Pro Find 35,
- Primary Interest:
- Beach & Shallow Water Hunting
Each year I find 1,000-2,000 coins while metal detecting mostly beaches and I've been searching for a large but inexpensive way to clean my found coins via tumbler. No luck. Coin tumblers run $150 or more - a large chunk of my change. So I searched for a cheap way to build a large coin tumbler; one that could handle at least a 1,000 coins. My solution: The Riding Mower Coin Tumbler.
Here is a picture of my Riding Mower Coin Tumbler - I have attached, by 2 - 30" pull-cords, a 2 gallon plastic container to a back wheel of my Craftsman riding lawn mower. I filled the container with about 900 coins and off I went...nothing happened. The coins simply slid along the smooth bottom of the container as the wheel turned and I couldn't go fast enough to enable the coins to tumble. To solve the problem, I placed a coil of 1/2 copper tubing tightly inside the container so that as the container turned the coins would hit the copper tubing and start to tumble, it worked. After 20 minutes of cutting the yard, I checked the coins and found them to be much cleaner and also found a large amount of fine powder in the container - coin crud residue.
Thirty minutes is about enough time to tumble about 1,000 coins, although they still need to be washed and dried. Feel free to improvise on my invention. If you decide to replicate my findings, I should warn you - use a secure container; otherwise, you might be using your metal detector to find coins that you're already found. Also, DO NOT replicate this type of tumbler with your car or truck.
[/B]
Here is a picture of my Riding Mower Coin Tumbler - I have attached, by 2 - 30" pull-cords, a 2 gallon plastic container to a back wheel of my Craftsman riding lawn mower. I filled the container with about 900 coins and off I went...nothing happened. The coins simply slid along the smooth bottom of the container as the wheel turned and I couldn't go fast enough to enable the coins to tumble. To solve the problem, I placed a coil of 1/2 copper tubing tightly inside the container so that as the container turned the coins would hit the copper tubing and start to tumble, it worked. After 20 minutes of cutting the yard, I checked the coins and found them to be much cleaner and also found a large amount of fine powder in the container - coin crud residue.
Thirty minutes is about enough time to tumble about 1,000 coins, although they still need to be washed and dried. Feel free to improvise on my invention. If you decide to replicate my findings, I should warn you - use a secure container; otherwise, you might be using your metal detector to find coins that you're already found. Also, DO NOT replicate this type of tumbler with your car or truck.
[/B]
Amazon Forum Fav 👍
Upvote
0