Pistol Triggers/Hammers?

[CSA2K]

Found these about 40yrs ago and never had them ID'd. Remembered I had them from another thread in here.. http://forum.treasurenet.com/index.php/topic,456176.0.html. They all have a groove running along the top. The one on the left is 2" and the 3 smaller ones are just under 1.5".

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[CSA2K]

Re: Triggers?

Here's a better pic. You can see the grooves and actually how small they are. From toy guns? And oddly enough they were all found at different locations on the same property.

 

[lostcauses]

look like distributor advance weights, for automotive. Edited to add: Strikes the automotive part.
after looking closer the out side groove appears to be a pulley, Might have been broke and scattered.

 

[taz42o]

Saw teeth.

http://www.smithhamilton.com/catalog/products/saws/inserted/it.saw.html

 

[lostcauses]

Saw teeth.

http://www.smithhamilton.com/catalog/products/saws/inserted/it.saw.html

Agreed. New I had seen em some were before. was driving me nuts.

 

[Charlie P. (NY)]

Great ID, I was headed down a dead-end with planters or harvesters.

Triggers and hammers would not be grooved and they'd all have pivot holes.

 

[CSA2K]

Well I'll be.. had saw teeth in my gun part pile for 40yrs..

Thanks for the ID!