Newbie questions

Raisinkain

Jr. Member
Joined
Jul 14, 2005
Messages
28
Reaction score
0
Golden Thread
0
Location
Roseboro
Upvote 0
To dig a Plug, simply cut a circular hole in the ground with ur knife, then lift it out. There are some tools that cut plugs for you, maybe someone has a link.
 

If you're digging and not finding anything you have one of about 3 problems. You have missed the target. It is there but you just dug in the wrong place. OR Your sensitivity is set too high causing false signals. OR You are digging in an area with something causing interference such as a metal fence or near a large metal object (metal grandstands), high energy highline overhead, etc. Watch out for copper water lines or underground utilities. Oops that's four! JIM
 

Top Member Reactions

Users who are viewing this thread

Back
Top Bottom