oldkoot
Bronze Member
- Joined
- Jan 18, 2017
- Messages
- 1,043
- Reaction score
- 1,559
- Golden Thread
- 0
- Location
- in the Tucson AZ area now
- Detector(s) used
- Garrett Axiom
Garrett GM 24K
Troy Shadow X5
Golden mask 4 WD
Golden Mask 7
Tesoro Vaquero, Tesoro Tejon & Bandito 2 Umax
Fisher Cz5
Xterra 705
x2 quest X Pointer Max - my favorite
Fisher F Pulse
- Primary Interest:
- Prospecting
- #1
Thread Owner
Nokta has revised some of the settings in the Beta Test version
If you experience any issues opening the setup file, please disable all anti-virus programs on your PC.
The latest update includes all previous updates.
Download: The Legend Update Tool (macOS) Includes System Software V1.10 - V1.09 - V1.07 - V1.05
ONCE YOU TEST THE LEGEND 1.10 BETA VERSION, IF YOU COME ACROSS ANY BUGS OR FAULTS, PLEASE REPORT THEM BY SENDING AN EMAIL TO LGV10@noktadetectors.com BY JANUARY 23, 2023.
PLEASE NOTE THAT WE WILL ONLY EVALUATE BUG OR FAULT REPORTS AND NO "WISH LISTS" AT THIS POINT SO WE CAN RELEASE THE FINAL VERSION SOONER THAN LATER.
THANK YOU FOR YOUR UNDERSTANDING.
1. The loudness of the warning tones, which was added to the buttons in the Beta 1 Test Version, has been updated so that it works directly proportional to the Volume setting.
2. Based on the feedback received from users on the reduced brightness of the Backlight Level 1 in the Beta Test Version 1, the Backlight setting has been reconfigured as below:
The Backlight setting’s levels have been increased to 6 from 5. Levels 1-5 in the software version 1.09 is now equal to 2-6 in this version. Level 1 in this version is now the reduced level.
3. The automatic Backlight setting has been reconfigured to work as below:
a) When the automatic Backlight setting was on, the automatic Backlight was not activated when the pinpoint button was pressed to turn on Tracking in the Ground Balance screen. This now has been updated.
b) When the automatic Backlight setting was on, the Backlight was turning off once you exit the Settings menu. This now has been updated so that the Backlight goes off within the normal time-out period.
c) When the automatic Backlight setting was on, the automatic Backlight was not activated when the pinpoint button was pressed in the Notch Discrimination Pattern. This now has been updated.
Software Update
Important!
Operating systems: Windows, MacOSIf you experience any issues opening the setup file, please disable all anti-virus programs on your PC.
The latest update includes all previous updates.
ONCE YOUR DEVICE HAS BEEN UPDATED, PLEASE REVERT BACK TO FACTORY DEFAULTS!
Download: The Legend Update Tool (Windows) Includes System Software V1.10 - V1.09 - V1.07 - V1.05Download: The Legend Update Tool (macOS) Includes System Software V1.10 - V1.09 - V1.07 - V1.05
ONCE YOU TEST THE LEGEND 1.10 BETA VERSION, IF YOU COME ACROSS ANY BUGS OR FAULTS, PLEASE REPORT THEM BY SENDING AN EMAIL TO LGV10@noktadetectors.com BY JANUARY 23, 2023.
PLEASE NOTE THAT WE WILL ONLY EVALUATE BUG OR FAULT REPORTS AND NO "WISH LISTS" AT THIS POINT SO WE CAN RELEASE THE FINAL VERSION SOONER THAN LATER.
THANK YOU FOR YOUR UNDERSTANDING.
System Software V1.10 Beta 2 Test Version (2023.01.13)
Updates Made:1. The loudness of the warning tones, which was added to the buttons in the Beta 1 Test Version, has been updated so that it works directly proportional to the Volume setting.
2. Based on the feedback received from users on the reduced brightness of the Backlight Level 1 in the Beta Test Version 1, the Backlight setting has been reconfigured as below:
The Backlight setting’s levels have been increased to 6 from 5. Levels 1-5 in the software version 1.09 is now equal to 2-6 in this version. Level 1 in this version is now the reduced level.
3. The automatic Backlight setting has been reconfigured to work as below:
a) When the automatic Backlight setting was on, the automatic Backlight was not activated when the pinpoint button was pressed to turn on Tracking in the Ground Balance screen. This now has been updated.
b) When the automatic Backlight setting was on, the Backlight was turning off once you exit the Settings menu. This now has been updated so that the Backlight goes off within the normal time-out period.
c) When the automatic Backlight setting was on, the automatic Backlight was not activated when the pinpoint button was pressed in the Notch Discrimination Pattern. This now has been updated.