Need some feedback regarding the GTP 1350

[robert roy]

I understand how useful the Graphic Target Profile can be, especially if the target is big and turns out to be a crushed can. But how accurate is it when we get to smaller targets. A smaller target suggest a coin? Will it suggest with any accuracy if the smaller target is a pull tab as opposed to a coin? I've dug far too many of them already with My ace250 and my MXT.

Second question: how useful is this feature when in the Relic Mode?

REgards
Robert R

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[cosmic]

You can't tell between a pulltab and a coin..Small is a target 11/2" or less.. Medium 11/2" - 4".. Large 4" and greater..Pulltabs read higher than nickles on it.. When I pinpoint and the depth is under 3" I don't bother as its usually a pulltab.. Hope that helps...
Ray

 

[txkickergirl]

I have dug so many pull tabs with my ace its not funny I get 20 pull tabs to every nickle I pull out. The old round pull tabs are the only ones that show up as pull tabs on the ace. Now on the 1350 with the target size I know that if it reads a quarter but it shows a large target its not a quarter. Me being who I am has to dig it anyway just to make sure what it is and my reponse is almost always yep its junk.

 

[Rob66]

You can't tell between a pulltab and a coin..Small is a target 11/2" or less.. Medium 11/2" - 4".. Large 4" and greater..Pulltabs read higher than nickles on it.. When I pinpoint and the depth is under 3" I don't bother as its usually a pulltab.. Hope that helps...
Ray

Does that mean it can tell between pulltabs and gold as well?Since a nickel and gold has the same tone usually, very intrested!!! RD

 

[robert roy]

Thanks for all your responses (I sent some private mail to a couple of you).
So I just have to wonder if a persons money would be better spent on some other machine? What else can the GTP do that makes it worth getting?

RR