My Dredge weight is over 300 pounds

[jaguargene]

I'm almost finish with my dredge.It's weighting in at almost 350 # and 4 X 8 foot long. It's a 4 inch dredge with 11hp engine.It weights around 200 # upfront and 150 in the aft (rear).I hope to use two plastic 55 gal's upfront and two plastic 35 gal in the rear.Is this to much floation.I was hoping for lower weight but this is it.I'm afraid I might not get it in the water less I have a ramp.Are there any rivers that can be dredge with this setup in NC/SC/GA?Thanks for any help.

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[Hoser John]

OMG heavy is right as huge engine not needed for a lil'ol'4" as 5 hp rocks but deal is done and footvalve will be problematic as short. Run 4-35g barrels in a crik and 6 for rivers in fast water. Hire illegals for labor at Home Depot to haul-tons a au 2 u 2 -John

 

[jaguargene]

Hi this is the outcome when one newbe buy's before reseach.I've been buying the parts for a year and half.I've done alot of reseach now and know my big mistakes.My thinking a year ago was I need a 3X4 pump for a 4 inch dredge.LOL.I do plan to put a winch and air on it.Not picture is my hoses and other stuff about all is included in the 300 to 350 weight.This will no doubt be a team dredge.I'm retired at 50 so I have all the time in the world and can go anywhere

 

[63bkpkr]

jaguargene, that is "Quite" a rig you got there, I'd like to watch it work!

Hoser, that is one fine picture!! What parta CA you take that, though it looks like a recent pictue like from last weekend.
...........63bkpkr

 

[Hoser John]

4 years ago on the Trinity on my claims downstream from the BLM campground outta Douglas City. No gold as hammered but 100's and 100's a pounds of lead and trash taken off the bottom as salmon/steelhead illegal rigs completely filled every crack and crevice full of lead and sharp treble hook snagging rigs-scum suckn' dogs. 20'+ deep pools and swift water but ruined by millions of tons of reclaimation gravels that filled in pools so salmon/steelhead die but state enviros say wonderful jus' a wonderful as fishermen/canoist/rafters scream to high heaven. hahahahaha-John

 

[russau]

wow! 350 lbs! my 4 inch homeade dredge (w/o the hose/nozzel) is 165 lbs. with the flotation and engine.

 

[patches63]

mostly quit packing in my 4 inch rig pontoons.not heavy,but ackward to impossible sometimes taking both 1 trip.4 inch rigs are for tributaries my book,like to ratchet strap my box/flair to a truck tire,tire can be filled with rocks,or not.runs quiet,specially with riffles out in fines mode.if remote and no fisherman trash or tires i use driftlogs and ratchet straps.usually when using pontoons on my four,was wishing for a six,to get the dern hole opened up already.i like that long sluice,few less riffles and long rubber damper might help.

 

[TAKODA]

I reckon you'll be look'n to get the truck fairly
close to your objective .

 

[russau]

i prefer to float into a area rather than pack it in, then float it out when done!it maybe a couple of mile float in/out but its a nice day anyway! walking in/out the dredge area is ok after the dredge is inplace!

 

[Hoser John]

Amen Russ as us ol'dogs MUST work smarter to prosper-tons a au 2 u 2 -John

 

[russau]

John, it also doesent give away your location! as if i need to tell you! haha

 

[Hoser John]

Location?? LOCATION We ain' got no location for my vocation as just got back from yet another vacation. Besides ya'all know I'm a law abiding citizen in this spermicidal anal retentive state a confusion and bankruptcy in kalif--both financial.mentally and vocationally-and now permits in Misery a comn' ggggggggggsssssssskkkkkkkrrrrriiiiiisssssstttttttt-John

 

[russau]

yep! permits/rules/guidlines are a cumin for Missouri! im trying to stay on top of it to soften the blow!