more sapphires and gold from the Eldorado Bar Montana

sapphire miner

Jr. Member
Jan 20, 2010
26
4

Attachments

  • Image[1].jpg
    Image[1].jpg
    20.8 KB · Views: 1,975
  • Image[1] (2).jpg
    Image[1] (2).jpg
    25.8 KB · Views: 1,815
  • Image[1].jpg
    Image[1].jpg
    20.8 KB · Views: 1,807
  • Image[1] (2).jpg
    Image[1] (2).jpg
    25.8 KB · Views: 1,741
The time it took to process through the plant was 37 hours.
The last run was 4.5 hr and I ran 112 yards, 246,400 lbs or 123.2 tons fed into the plant.
What goes in, must come out and be dealt with, so multiply that number by 2, that shows
how much material was moved. That is in and out, not to and from, seems easy but if it
has moving parts, there will be issues!

photo's of some of last years stones cut.
 

Attachments

  • 1130000957[1].jpg
    1130000957[1].jpg
    15 KB · Views: 1,679
  • 0919001022a[1].jpg
    0919001022a[1].jpg
    24.9 KB · Views: 1,652
  • 1130000957[1].jpg
    1130000957[1].jpg
    15 KB · Views: 1,656
Upvote 0
That's a great collection from your work. When you say "my mine in Montana" are you talking a privately owned underground mine? If so, that's a dream of mine to have and work one. Do you use a trommel? Did you buy the land and develop the mine?
 

Upvote 0
I am talking private, I have two. I purchased raw land, developed well, pond, and plant.
The smaller property had some old mine tailing's, from long ago. I use a trommel, see video at youtube,
under thegemminer one word. I may be interested in selling a number of undivided interests in the
small mine its 3.6 acres has easy digging, good gold and great views. This would make for great camping areas
and would come with an access to the Missouri River, though not yet developed for boat launch.
This is a placer mine, meaning material was moved here, so no underground work, it's pit and bank mining.
This is not a claim this is real property.
 

Upvote 0
Do you know anyone other than the Yogo that can heat treat sapphires?

We came across a place in 2006 that had sapphires eroding out of the host rock. No claims are on the site, so we went back and collected more than a 5 gallon bucket full. Been slowly cleaning and sizing them to make necklaces for the daughters. They range in sizes of less than 1mm up to just over 1.5 cm, most are in the mid-range sizes.

A friend finally convinced me to act on our find, I want to know what they look like heat treated before I sink a while lot of money into the site. The area that is eroding out covers close to twenty acres.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top